SPE Production & Operations

Vol. 35 // No. 2    May 2020

 

Hydraulic Fracturing


202–213
SPE-190256-PA

Water Leakoff During Gel Placement in Fractures: Extension to Oil-Saturated Porous Media

B. Brattekås, R. Seright, and G. Ersland

214–230
SPE-197052-PA

The Effect of Resin-Coated Proppant and Proppant Production on Convergent-Flow Skin in Horizontal Wells With Transverse Fractures

J. R. Shaoul, J. Park, and M. Langford

231–244
SPE-187322-PA

Inversion of Downhole Temperature Measurements in Multistage-Fracturing Stimulation of Horizontal Wells in Unconventional Reservoirs

S. Zhang and D. Zhu

245–254
SPE-197044-PA         (Direct to Peer)

An Experimental Approach To Assess the Dispersion of Shale in Fracturing Fluids

I. de Araujo Muggli, K. Chellappah, and I. R. Collins

255–271
SPE-197048-PA

Integrated Interpretation of Microseismic and Petroleum-Engineering Data for Comparison of Gas Production in Two Interfering Adjacent Wellpads in the Horn River Basin, Canada

A. Yousefzadeh, Q. Li, R. Aguilera, and C. Virués

272–291
SPE-194329-PA       

Use of Far-Field Diverters To Mitigate Parent- and Infill-Well-Fracture Interactions in Shale Formations

J. Zhang, D. D. Cramer, J. McEwen, M. White, and K. Bjornen

Water Production and Injection


292–307
SPE-197061-PA         (Direct to Peer)

Produced-Water Reinjection in Deep Offshore Miocene Reservoirs, Block 17, Angola

M. Mainguy, S. Perrier, and E. Bure

308–319
SPE-195499-PA       

Risk Assessment and Simulation of Injectivity Decline Under Uncertainty

M.-M. Chiotoroiu, T. Clemens, M. Zechner, J. Hwang, M. M. Sharma, and M. Thiele

320–334
SPE-192064-PA       

Experimental Investigation of Crude-Oil Emulsion Stability: Effect of Oil and Brine Compositions, Asphaltene, Wax, Toluene Insolubles, Temperature, Shear Stress, and Water Cut

T. Uetani, J. Kai, T. Hitomi, H. Seino, K. Shimbori, and H. Yonebayashi

335–350
SPE-195485-PA       

Water Shutoff with Polymer in the Alvheim Field

K. Langaas and A. Stavland

351–361
SPE-199364-PA         (Direct to Peer)

Design and Analysis of a New Profile Control Tool: Swirling Autonomous Inflow-Control Device

M. Yang, X. Wu, Y. Yue, Y. Zhang, Y. Chen, and Y. Tang

362–372
SPE-193631-PA

Effect of Network Parameters of Preformed Particle Gel on Structural Strength for Water Management

M. Baghban Salehi, A. Mousavi Moghadam, and K. Jarrahian

373–383
SPE-200474-PA         (Direct to Peer)

Experimental and Numerical Investigation of Backwash Flow in Nutshell Filter

F. Sadeghi, H. Bashiri, and A. J. W. H. Vissers

384–392
SPE-200495-PA         (Direct to Peer)

Experimental Investigation of Bubble Size in Flotation: Effect of Salt, Coagulant, Temperature, and Organic Compound

F. Sadeghi and A. J. W. H. Vissers

Artificial Lift


393–405
SPE-183164-PA       

Modeling Gerotor Pump Performance in Artificial Lift for Single-Phase and Multiphase Conditions

C. E. Ejim, L. Oshinowo, and J. Xiao

406–421
SPE-200478-PA         (Direct to Peer)

Development and Efficiency Testing of Sucker Rod Pump Downhole Desanders

C. Langbauer, M. Hartl, S. Gall, L. Volker, C. Decker, L. Koller, and S. Hönig

422–434
SPE-196592-PA

Artificial Lift System Applications in Tight Formations: The State of Knowledge

O. Kolawole, T. D. Gamadi, and D. Bullard

435–447
SPE-200494-PA         (Direct to Peer)

Identification of Downhole Conditions in Sucker Rod Pumped Wells Using Deep Neural Networks and Genetic Algorithms

R. Abdalla, M. Abu El Ela, and A. El-Banbi

448–453
SPE-192459-PA

A Holistic Approach in Establishing a Structured Framework to Maximize Production Availability through Integrated ESP Key Performance Indicators

A. Al-Khalaf, S. Alquwizani, H. AlSadah, and C. Flippin

454–463
SPE-200497-PA         (Direct to Peer)

Progressive Vortex Pump: A New Artificial Lift Pumped Method

R. S. Fraga, O. G. S. Castellões, B. W. Assmann, V. Estevam, G. T. de Moura, I. N. Schröer, and L. G. do Amaral