SPE Reservoir Evaluation & Engineering

Vol. 21 // No. 2        May 2018

    

Spotlight on Unconventional Reservoirs


225–237
SPE-181842-PA
Fracture Characteristics and Change of Permeability Under the Influence of Natural Fractures: Experimental Study of Wufeng-Longmaxi Shale
H. Y. Zhu, L. Tao, Q. Y. Liu, Z. D. Lei, S. Jiang, and J. D. McLennan

238–256
SPE-185025-PA
Quantitative Evaluation of Key Geological Controls on Regional Eagle Ford Shale Production Using Spatial Statistics
Y. Tian, W. B. Ayers, H. Sang, W. D. McCain Jr., and C. Ehlig-Economides

257–272
SPE-185065-PA
Evaluation of Imbibition Oil Recovery in the Duvernay Formation
M. R. Yassin, H. Dehghanpour, M. Begum, and L. Dunn

273–290
SPE-189454-PA
Geomechanical Simulation of Partially Propped Fracture Closure and Its Implication for Water Flowback and Gas Production
Y. Liu, J. Y. Leung, and R. Chalaturnyk

291–306
SPE-189982-PA
Assessment of Hydrocarbon in Place and Recovery Factors in the Eagle Ford Shale Play
S. A. Gherabati, U. Hammes, F. Male, and J. Browning

307–324
SPE-189983-PA
Relative Permeability and Production-Performance Estimations for Bakken, Wolfcamp, Eagle Ford, and Woodford Shale Formations
S. P. Ojha, S. Misra, A. Sinha, S. Dang, A. Tinni, C. Sondergeld, and C. Rai

Enhanced Oil Recovery


325–343
SPE-176444-PA
Novel Enhanced-Oil-Recovery Decision-Making Work Flow Derived From the Delphi-AHP-TOPSIS Method: A Case Study
B. Liang, H. Jiang, J. Li, H. Yang, W. Chen, C. Gong, and S. Qu

344–363
SPE-181732-PA
Methodology for the Development of Laboratory-Based Comprehensive Foam Model for Use in the Reservoir Simulation of Enhanced Oil Recovery
M. Abbaszadeh, A. Varavei, F. Rodríguez de la Garza, A. E. Villavicencio Pino, J. L. Lopez Salinas, M. C. Puerto, G. J. Hirasaki, and C. A. Miller

Formation Evaluation


364–372
SPE-183165-PA
Borehole Controlled-Source Electromagnetics for Hydrocarbon-Saturation Monitoring in the Bockstedt Oil Field, Onshore Northwest Germany
K. Tietze, O. Ritter, C. Patzer, P. Veeken, and B. Verboom

373–391
SPE-189446-PA
Estimation of Pore-Network Characteristics and Irreducible Saturations in Wolfcamp and Eagle Ford Shales Using Low-Pressure-Nitorgen-Adsorption/Desorption-Isotherm Measurements
S. P. Ojha, S. Misra, A. Tinni, C. Sondergeld, and C. Rai
    

Geomechanics


392–404
SPE-175907-PA
Characterization of Anisotropic Elastic Moduli and Stress for Unconventional Reservoirs Using Laboratory Static and Dynamic Geomechanical Data
F. Hamza, C. Chen, M. Gu, J. Quirein, V. Martysevich, and L. Matzar

405–417
SPE-181833-PA
Micromechanical Characterization of Fluid/Shale Interactions by Means of Nanoindentation
Z. Yang, L. Wang, Z. Chen, D. Xiang, D. Hou, C. Ho, and G. Zhang

Heavy Oil


418–432
SPE-180722-PA
In-Situ Dilation Affects Solvent-Assisted Steam-Assisted-Gravity-Drainage Performance: The Case of a Shallow Athabasca-Type Oil-Sands Reservoir
Y. Abbasi Asl and R. J. Chalaturnyk

433–444
SPE-174453-PA
Experimental Study on Geomechanical Dilation of Oil Sands During Cold-Water Injection
X. Wang, R. Chalaturnyk, H. Huang, and J. Leung

Reservoir Characterization


445–461
SPE-185052-PA
Multiwell, Multiphase Flowing Material Balance
M. S. Shahamat and C. R. Clarkson

462–475
SPE-187963-PA
An Integrated Modeling Work Flow With Hydraulic Fracturing, Reservoir Simulation, and Uncertainty Analysis for Unconventional-Reservoir Development
B. Liang, S. Khan, and S. D. Puspita

476–488
SPE-189442-PA
Appraising Carbon Geological-Storage Potential in Unconventional Reservoirs: Engineering-Parameters Analysis
Z. Chen, X. Liao, X. Zhao, and X. Li
    

Reservoir Simulation


489–502
SPE-184825-PA
A Numerical Model for Simulating Pressure Response of Well Interference and Well Performance in Tight Oil Reservoirs With Complex-Fracture Geometries Using the Fast Embedded-Discrete-Fracture-Model Method
W. Yu, Y. Xu, R. Weijermars, K. Wu, and K. Sepehrnoori

503–520
SPE-185875-PA
Scaling Up Highly Permeable Thin Layers Into Flow Simulation
M. Gomes Correia and D. J. Schiozer
    

Well Testing


521–532
SPE-187955-PA
Fractured-Injection-Well Performance Under Non-Newtonian, Power-Law Fluids
R. Raghavan and C. Chen

Erratum


SPE-183640-ER
Erratum for A Review and Extension of Existing Consistency Tests for PVT Data From a Laboratory
K. Potsch
    – Correction to Eq. 14 on page 278 of SPE-183640-PA [ SPE Res Eval & Eng 20 (2): 269–284. https://doi.org/10.2118/183640-PA].