SPE Reservoir Evaluation & Engineering 

Vol. 20 // No. 2                May 2017


Enhanced Oil Recovery


251–259
SPE-183635-PA
Effect of Viscosity on Oil Production by Cocurrent and Countercurrent Imbibition From Cores With Two Ends Open
Q. Meng, H. Liu, and J. Wang

260–268
SPE-179545-PA
Residual-Oil Zone: Paleo-Oil Characterization and Fundamental Analysis
A. Aleidan, H. Kwak, H. Muller, and X. Zhou



Fluid Properties


269–284
SPE-183640-PA
A Review and Extension of Existing Consistency Tests for PVT Data From a Laboratory
K. Potsch, P. Toplack, and T. Gumpenberger



Formation Evaluation


285–292
SPE-180194-PA
Significance of Time-Lapsed Hydrocarbon Saturations From Pulsed-Neutron-Capture (PNC) Logs and the Impact of Borehole-Environment Parameters on PNC-Derived Saturations
A. Ali, S. Small, K. Singh, and A. Martin

293–303
SPE-175064-PA
Effect of Heterogeneity on Fluid-Injectivity Loss During Water-Alternating-Gas Injection in the Scurry Area Canyon Reef Operators Committee Unit
M. Saneifar, Z. Heidari, M. Linroth, and S. A. Purba

304–316
SPE-180242-PA
A Petrophysical Dual-Porosity Model for Evaluation of Secondary Mineralization and Tortuosity in Naturally Fractured Reservoirs
J. Piedrahita and R. Aguilera

317–333
SPE-183643-PA
A Structured Mobility-Based Methodology for Quantification of Net-Pay Cutoff in Petroleum Reservoirs
H. Saboorian-Jooybari



Geostatistics


334–341
SPE-183644-PA
A Stochastic Approach for Optimal Sequencing of Appraisal Wells
O. A. El Souki and G. A Saad

342–352
SPE-180489-PA
3D Reconstruction of Porous Media From a 2D Section and Comparisons of Transport and Elastic Properties
M. E. Naraghi, K. Spikes, and S. Srinivasan



Heavy Oil


353–362
SPE-184390-PA
A Practical Methodology for Integration of 4D Seismic in Steam-Assisted-Gravity-Drainage Reservoir Characterization
M. Hadavand and C. V. Deutsch

363–371
SPE-183646-PA
Wettability Alteration of Heavy-Oil-Bitumen-Containing Carbonates by Use of Solvents, High-pH Solutions, and Nano/Ionic Liquids
N. Cao, M. Almojtaba Mohammed, and T. Babadagli

372–382
SPE-183638-PA
High-Temperature Solvent Injection for Heavy-Oil Recovery From Oil Sands: Determination of Optimal Application Conditions Through Genetic Algorithm
H. Leyva-Gomez and T. Babadagli



Reservoir Simulation


383–393
SPE-184404-PA
Nonlocal Diffusion in Fractured Rocks
R. Raghavan, C. Chen, and J. J. DaCunha

394–402
SPE-184389-PA
The Effect of Polymer Rheology and Induced Fracturing on Injectivity and Pressure-Transient Behavior
Y. Ma and M. W. McClure

403–422
SPE-183647-PA
Discrete-Fracture Modeling of Complex Hydraulic-Fracture Geometries in Reservoir Simulators
Y. Xu, J. S. A. Cavalcante Filho, W. Yu, and K. Sepehrnoori



Unconventional Reservoirs


423–445
SPE-179116-PA
Microseismic Closure Window Characterizes Hydraulic-Fracture Geometry Better
S. Liu, P. P. Valkó, S. McKetta, and X. Liu

446–470
SPE-171577-PA
Effect of Fracture Roughness, Shear Displacement, Fluid Type, and Proppant on the Conductivity of a Single Fracture: A Visual and Quantitative Analysis
A. Raimbay, T. Babadagli, E. Kuru, and K. Develi

471–477
SPE-183645-PA
Experimental and Numerical Study of Enhanced Condensate Recovery by Gas Injection in Shale Gas–Condensate Reservoirs
X. Meng, J. J. Sheng, and Y. Yu

478–485
SPE-183650-PA
Approximate Bayesian Computation for Probabilistic Decline-Curve Analysis in Unconventional Reservoirs
M. Paryani, O. O. Awoleke, M. Ahmadi, C. Hanks, and R. Barry



Well Testing


486–501
SPE-183649-PA
Harmonic-Pulse Testing for Non-Darcy-Effects Identification
E. S. Borello, P. A. Fokker, D. Viberti, R. Espinoza, and F. Verga