SPE Drilling & Completion

Vol. 34 // No. 4          December 2019

Completion


345–355
SPE-187191-PA

Consistent Model for Injection and Falloff Pressure Match of Diagnostic Fracture Injection Tests (DFITs)

G. Liu and C. A. Ehlig-Economides

356–371
SPE-195683-PA

The Effect of Layered Modulus on Hydraulic-Fracture Modeling and Fracture-Height Containment

K. Yue, J. E. Olson, and R. A. Schultz

372–381
SPE-191456-PA 

The Importance of Clean Off-Plane Perforations in all Phases of a Deepwater Well and its Productivity Impact

K. A. V. Mahadev, P. Haldipur, S. J. Tinker, C. Stewart, and A. M. Roy

382–396
SPE-194146-PA

On the Sealability of Metal-to-Metal Seals With Application to Premium Casing and Tubing Connections

D. Ernens, F. Peréz-Ràfols, D. Van Hoecke, R. F. H. Roijmans, E. J. van Riet, J. B. E. Vande Voorde, A. Almqvist, M. Bas de Rooij, S. M. Roggeband, W. M. van Haaften, M. Vanderschueren, P. Thibaux, and H. R. Pasaribu

397–413
SPE-174755-PA

Review and Analysis of Zonal-Isolation Effectiveness in Carbonate Reservoirs Using Multistage Stimulation Systems

M. Nozaki, R. C. Burton, N. R. Zwarich, and K. Furui

 

Drilling


414–425
SPE-194072-PA             

High-Frequency At-Bit Measurements Provide New Insights Into Torsional Dynamics When Drilling With Steerable Mud Motors in Unconventional Horizontal Wells

J. K. Wilson, T. Whitacre, and G. Heisig

426–440
SPE-192953-PA             

Slimhole Unconventional Well-Design Optimization Enables Drilling Performance Improvement and Cost Reduction

E. Schumacker and P. Vogelsberg

441–449
SPE-194143-PA             

Verification of Downhole Choke Technology in a Simulator Using Data from a North Sea Well

M. Kvernland, D. Gorski, M. Sant’ Ana, J.-M. Godhavn, O. M. Aamo, and S. Sangesland

450–457
SPE-195699-PA              (Direct to Peer)

A Survey of Field Experiences With Formate Drilling Fluid

C. H. Gao

458–467
SPE-197041-PA              (Direct to Peer)

Model-Based Health Monitoring of Annular Blowout Preventers

T. Wassar, M. Mutlu, M. A. Franchek, and O. Hattab