Video: Potential of Associative Polymers as Mobility Control Agents in Low Permeability Carbonates
- Pinaki Ghosh (The University of Texas at Austin) | Angel Zepeda (The University of Texas at Austin) | Gildardo Bernal (The University of Texas at Austin) | Kishore Mohanty (The University of Texas at Austin)
- Document ID
- Society of Petroleum Engineers
- Publication Date
- Document Type
- 2019. Copyright is retained by the author. This presentation is distributed by SPE with the permission of the author. Contact the author for permission to use material from this video.
- Associative polymer, Low permeability, Mobility control, Carbonate rocks, EOR
- 1 in the last 30 days
- 1 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 7.00|
|SPE Non-Member Price:||USD 12.00|
Waterflood in low permeability carbonate reservoirs (<50 mD) leaves behind a substantial amount of oil due to capillary trapping and poor sweep. Addition of polymer to the injected water increases the viscosity of the aqueous phase and decreases the mobility ratio, thus, improving the sweep efficiency and oil production from the tight formations. Performance of current synthetic EOR polymers is limited by salinity, temperature and injectivity issues in low permeability formations. Mechanical shear degradation can be applied to high molecular weight synthetic polymers to improve the injectivitiy; but makes the process less economical due to significant viscosity loss and consequent increase in polymer dosage. Recently, a different class of polymer has been developed called "hydrophobically modified associative polymers (AP)". The primary goal of this work is to investigate the performance of associative polymers in low permeability carbonate reservoirs. We compare the performance of associative polymers with that of conventional HPAM polymers in low permeability formations. A low molecular weight associative polymer was investigated as part of this study. A detailed study of polymer rheology and the effect of salinity at the reservoir temperature (60 °C) was performed. Additional experiments were performed in bulk and porous media to investigate the synergy of associative polymers with hydrophilic surfactant blends at different brine salinities. Single phase polymer flow experiments were performed in outcrop Edwards Yellow and Indiana limestone cores of low permeability to determine the optimum polymer concentration to achieve the desired in-situ resistance factor (or apparent viscosity). Similar experiments were performed with HPAM polymer for a comparative study. Results showed successful transport of this associative polymer in low permeability formations after a small degree of shear degradation. The resistance factors for the associative polymer were higher than those for HPAM. Shear degraded polymers showed significant improvement in polymer transport in lower permeability cores with reduction in RRF.