Conformance Improvement in Oil Reservoirs by Use of Microemulsions
- V. A. Torrealba (King Abdullah University of Science and Technology) | H. Hoteit (King Abdullah University of Science and Technology)
- Document ID
- Society of Petroleum Engineers
- SPE Reservoir Evaluation & Engineering
- Publication Date
- October 2018
- Document Type
- Journal Paper
- 2018.Society of Petroleum Engineers
- surfactant, waterflooding, microemulsion, conformance improvement, rheology
- 7 in the last 30 days
- 146 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 10.00|
|SPE Non-Member Price:||USD 30.00|
The performance of many improved and enhanced-oil-recovery (EOR) techniques in conventional reservoirs is frequently degraded by conformance problems. The presence of high-permeability streaks or thief layers between injection and production wells typically results in premature water breakthrough, high water cut, and deficient volumetric sweep. As a result, significant oil volumes in the reservoir might not be contacted by the injection fluid.
Several conformance-improvement techniques (e.g., foams, gels, resins) have been developed and practiced in improved-oilrecovery operations. Each technique has its own advantages and limitations related to deployment practicality, effectiveness, and durability. In this paper, we introduce a novel conformance-improvement method (CIM) that we consider practical, effective, and durable. The CIM process consists of cyclical injections of pulse slugs of surfactant alternating with brine. The slug compositions are selected on the basis of the rheological behavior of the microemulsion phase. The chemical slugs are configured such that the viscosity of the injected fluids is kept low to preserve injectivity and to ensure the invasion of the conformance agent toward the thief zones. The trailing brine slugs are designed to produce a high-viscosity microemulsion as they mix with the leading surfactant slugs in the reservoir. The proposed process leads to a reduction in the effective mobility of the fluids in the thief layers. As a result, the chase waterflood (WF) would divert into previously uncontacted layers to improve the sweep efficiency.
The potential of the proposed CIM in improving oil recovery is demonstrated by various simulations of reservoir cases under waterflooding. We performed various sensitivities to investigate the effectiveness of the proposed process that include well spacing, permeability contrast, size of the thief layers, heterogeneity, and the size of the chemical pulse slugs. Simulations showed that this process is effective in addressing reservoir-conformance issues, and therefore it has the potential to improve the sweep efficiency and the recovery factor (RF) in reservoirs with distinct thief layers. The treatment surfactant volumes are relatively small, which enables this process to be cost-effective.
Correction Notice: This preprint paper has been modified from its original version to correct Fig. 11 by adding the OC (CIM) curve to the figure's right-hand plot. No other changes were made.
|File Size||1 MB||Number of Pages||19|
Acosta, E., Szekeres, E., Sabatini, D. A. et al. 2003. Net-Average Curvature Model for Solubilization and Supersolubilization in Surfactant Microemulsions. Langmuir 19 (1): 186–195. https://doi.org/10.1021/la026168a.
Adepoju, O. O., Hussein, H., and Chawathe, A. 2017. Assessment of Chemical Performance Uncertainty in Chemical EOR Simulations. Presented at the SPE Reservoir Simulation Conference, Montgomery, Texas, 20–22 February. SPE-182596-MS. https://doi.org/10.2118/182596-MS.
Bai, B., Han, M., Li, Y. et al. 2000. Selective Water Shutoff Technology Study and Application of W/O Emulsions. Presented at the SPE/DOE Improved Oil Recovery Symposium, Tulsa, 3–5 April. SPE-59320-MS. https://doi.org/10.2118/59320-MS.
Bennett, K. E., Davis, H. T., Macosko, C. W. et al. 1981. Microemulsion Rheology: Newtonian and Non-Newtonian Regimes. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 4–7 October. SPE-10061-MS. https://doi.org/10.2118/10061-MS.
Bernard, G. C., Holm, L. W., and Harvey, C. P. 1980. Use of Surfactant to Reduce CO2 Mobility in Oil Displacement. SPE J. 20 (4): 281–292. SPE-8370-PA. https://doi.org/10.2118/8370-PA.
Camilleri, D., Fil, A., Pope, G. A. et al. 1987. Improvements in Physical-Property Models Used in Micellar/Polymer Flooding. SPE Res Eval & Eng 2 (4): 433–440. SPE-12723-PA. https://doi.org/10.2118/12723-PA.
Christie, M. A. and Blunt, M. J. 2001. Tenth SPE Comparative Solution Project: A Comparison of Upscaling Techniques. Presented at the SPE Reservoir Simulation Symposium, Houston, 11–14 February. SPE-66599-MS. https://doi.org/10.2118/66599-MS.
Clifford, P. J. and Sorbie, K. S. 1985. The Effects of Chemical Degradation on Polymer Flooding. Presented at the SPE Oilfield and Geothermal Chemistry Symposium, Phoenix, Arizona, 9–11 March. SPE-13586-MS. https://doi.org/10.2118/13586-MS.
Gaucher, D. H. and Lindley, D. C. 1960. Waterflood Performance in a Stratified, Five-Spot Reservoir—A Scaled-Model Study. Petroleum Trans., AIME 219: 208–215. SPE-1311-G. https://doi.org/10.2118/1311-G.
Gogarty, W. B. 1967. Mobility Control With Polymer Solutions. SPE J. 7 (2): 161–173. SPE-1566-B-PA. https://doi.org/10.2118/1566-B-PA.
Gogarty, W. B., Meabon, H. P., and Milton, H. W. 1970. Mobility Control Design for Miscible-Type Waterfloods Using Micellar Solutions. J Pet Technol 22 (2): 141–147. SPE-1847-E-PA. https://doi.org/10.2118/1847-E-PA.
Gupta, A., Narsimhan, V., Hatton, T. A. et al. 2016. Kinetics of the Change in Droplet Size During Nanoemulsion Formation. Langmuir 32 (44): 11551–11559. https://doi.org/10.1021/acs.langmuir.6b01862.
Hoteit, H., Alexis, D., Adepoju, O. O. et al. 2016. Numerical and Experimental Investigation of Polymer-Induced Resistance to Flow in Reservoirs Undergoing a Chemical Flood. Presented at the SPE Annual Technical Conference and Exhibition, Dubai, 26–28 September. SPE-181720-MS. https://doi.org/10.2118/181720-MS.
Khorsandi, S. and Johns, R. T. 2016. Robust Flash Calculation Algorithm for Microemulsion Phase Behavior. Journal of Surfactants and Detergents 19 (6): 1273–1287. https://doi.org/10.1007/s11743-016-1877-9.
Labrid, J. C. 1979. Oil Displacement Mechanisms by Winsor’s Type I Micellar Systems. Presented at the SPE Annual Technical Conference and Exhibition, Las Vegas, Nevada, 23–26 September. SPE-8325-MS. https://doi.org/10.2118/8325-MS.
Lake, L. W., Johns, R., Rossen, B. et al. 2014. Fundamentals of Enhanced Oil Recovery. Richardson, Texas: Society of Petroleum Engineers.
Lee, K. S. and Claridge, E. L. 1968. Areal Sweep Efficiency of Pseudoplastic Fluids in a Five-Spot Hele-Shaw Model. SPE J. 8 (1): 52–62. SPE-1849-PA. https://doi.org/10.2118/1849-PA.
Manzocchi, T., Carter, J. N., Skorstad, A. et al. 2008. Sensitivity of the Impact of Geological Uncertainty on Production From Faulted and Unfaulted Shallow-Marine Oil Reservoirs: Objectives and Methods. Petroleum Geoscience 14 (1): 3–15. https://doi.org/10.1144/1354-079307-790.
Romero, L., Ziritt, J. L., Marin, A. et al. 1996. Plugging of High Permeability-Fractured Zones Using Emulsions. Presented at the SPE/DOE Improved Oil Recovery Symposium, Tulsa, 21–24 April. SPE-35461-MS. https://doi.org/10.2118/35461-MS.
Singh, R. and Mohanty, K. K. 2015. Synergy Between Nanoparticles and Surfactants in Stabilizing Foams for Oil Recovery. Energy and Fuels 29 (2): 467–479. https://doi.org/10.1021/ef5015007.
Sydansk, R. D. 1994a. Polymer-Enhanced Foams Part 1: Laboratory Development and Evaluation. SPE Advanced Technology Series 2 (2): 150–159. SPE-25168-PA. https://doi.org/10.2118/25168-PA.
Sydansk, R. D. 1994b. Polymer-Enhanced Foams Part 2: Propagation Through High-Permeability Sandpacks. SPE Advanced Technology Series 2 (2): 160–166. SPE-25175-PA. https://doi.org/10.2118/25175-PA.
Sydansk, R. D. and Romero-Zero´n, L. 2010. Reservoir Conformance Improvement. Richardson, Texas: Society of Petroleum Engineers.
Tagavifar, M., Herath, S., Weerasooriya, U. P. et al. 2018. Measurement of Microemulsion Viscosity and Its Implications for Chemical Enhanced Oil Recovery. SPE J. 23 (1): 66–83. SPE-179672-PA. https://doi.org/10.2118/179672-PA.
Torrealba, V. A. and Johns, R. T. 2017. Coupled Interfacial Tension and Phase Behavior Model on the Basis of Micellar Curvatures. Langmuir 33 (47): 13604–13614. https://doi.org/10.1021/acs.langmuir.7b03372.
Torrealba, V. A., Hoteit, H., and Chawathe, A. 2017. Improving Chemical EOR Simulations and Reducing the Subsurface Uncertainty Using Downscaling Conditioned to Tracer Data. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 9–11 October.
UTCHEM. 2000. Chemical Flooding Research Simulator 9.0. Computer software, The University of Texas at Austin, Austin, Texas.
Vadgama, U. N. and Hinkle, B. B. 1973. Crossflooding To Improve Waterflood Efficiency in Big Sinking Field, Kentucky. J Pet Technol 25 (9): 1021–1024. SPE-4150-PA. https://doi.org/10.2118/4150-PA.
Vinot, B., Schechter, R. S., and Lake, L. W. 1989. Formation of Water-Soluble Silicate Gels by the Hydrolysis of a Diester of Dicarboxylic Acid Solubilized as Microemulsions. SPE Res Eval & Eng 4 (3): 391–397. SPE-14236-PA. https://doi.org/10.2118/14236-PA.
Wennerstro, H., So, O., Olsson, U. et al. 1997. Macroemulsions Versus Microemulsions. Colloids and Surfaces A: Physicochemical and Engineering Aspects 123: 13–26.
White, J. L., Goddard, J. E., and Phillips, H. M. 1973. Use of Polymers To Control Water Production in Oil Wells. J Pet Technol 25 (2): 143–150. SPE-3672-PA. https://doi.org/10.2118/3672-PA.
Winsor, P. 1954. Solvent Properties of Amphiphilic Compounds. London: Butterworths.
Zhai, X. and Efrima, S. 1996. Chemical and Physical Aspects of Macroemulsions Stabilized by Interfacial Colloids. The Journal of Physical Chemistry 100 (26): 11019–11028. https://doi.org/10.1021/jp953171c.
Zhang, G. and Seright, R. S. 2007. Conformance and Mobility Control: Foams Versus Polymers. Presented at the International Symposium on Oilfield Chemistry, Houston, 28 February–2 March. SPE-105907-MS. https://doi.org/10.2118/105907-MS.