Improved Wellbore Stability in North Sea Lark and Horda Shales Through Shale/Fluid-Compatibility Optimization
- Eric van Oort (EVO Energy Consulting) | Christian Pasturel (Total E&P) | Jedrzej Bryla (Total E&P) | Frederik Ditlevsen (Total E&P)
- Document ID
- Society of Petroleum Engineers
- SPE Drilling & Completion
- Publication Date
- March 2019
- Document Type
- Journal Paper
- 46 - 59
- 2019.Society of Petroleum Engineers
- Fluid-Shale Interaction, Time-Delayed Borehole Failure, Pressure Transmission, Wellbore Stability, High Performance Water Based Mud
- 8 in the last 30 days
- 396 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 35.00|
Offshore wells drilled in the central and northern North Sea have historically suffered from borehole-instability problems when intersecting the Upper/Lower Lark and Horda Shale formations using either water-based mud (WBM) or oil-based mud (OBM). A wellbore-stability investigation was performed that focused primarily on improving shale/fluid compatibility. It was augmented by a look-back analysis of historical drilling operations to help identify practical solutions to the borehole-instability problems.
An experimental rock-mechanics and shale/fluid-compatibility investigation was performed featuring X-ray-diffraction (XRD) and cation-exchange-capacity (CEC) characterizations, shale accretion, cuttings dispersion, mud-pressure transmission, and a new type of borehole-collapse test for 10 different mud systems [WBM, OBM, and high-performance WBM (HP-WBM)]. The results of this investigation were then combined with the results of a well look-back study. The integrated study clearly identified the root cause(s) of historical well problems and highlighted practical solutions that were subsequently implemented in the field.
The borehole-instability problems in the Lark and Horda Shales have a characteristic time dependency, with wellbore cavings occurring after 3 to 5 days of openhole time. The problems were not related to mud-weight selection but were instead caused by mud-pressure invasion into the shales, which destabilizes them over time. An experimental testing program revealed that this effect occurs in both WBM and OBM to an equal extent, which explains why nonoptimal field performance has historically been obtained with both types of mud systems. New HP-WBM formulations were identified that improve upon the mud-pressure invasion and borehole-collapse behavior of conventional OBM and WBM systems, yielding extended openhole time that allows the hole sections in the Lark and Horda Shales to be drilled, cased, and cemented without triggering large-scale instability. Look-back analysis also indicated that secondary causes of wellbore instability, such as barite sag, backreaming, and associated drillstring vibrations, should be minimized for optimal drilling performance. A new HP-WBM system, together with improved operational guidelines, was successfully implemented in the field, and the results are reported here.
|File Size||1015 KB||Number of Pages||14|
Barnfather, J. L., Bax, D. J. M., van Oort, E. et al. 1997. Application of Silicate-Based Drilling Fluid in Tertiary Clays Offshore Norway. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 5–8 October. SPE-38569-MS. https://doi.org/10.2118/38569-MS.
Bol, G. M., Wong, S.-W., Davidson, C. J. et al. 1994. Borehole Stability in Shales. SPE Drill & Compl 9 (2): 87–94. SPE-24975-PA. https://doi.org/10.2118/24975-PA.
Chenevert, M. E. and Amanullah, M. 2001. Shale Preservation and Testing Techniques for Borehole-Stability Studies. SPE Drill & Compl 16 (3): 146–149. SPE-73191-PA. https://doi.org/10.2118/73191-PA.
Gradishar, J., Ugueto, G., and van Oort, E. 2014. Setting Free the Bear: The Challenges and Lessons of the Ursa A-10 Deepwater Extended-Reach Well. SPE Drill & Compl 29 (2): 182–193. SPE-163525-PA. https://doi.org/10.2118/163525-PA.
Hale, A. H. 1991. Method To Quantify Viscosity Effects on Dispersion Test Improves Testing of Drilling-Fluid Polymers. SPE Drill Eng 6 (1): 44–50. SPE-19954-PA. https://doi.org/10.2118/19954-PA.
Nes, O.-M., Boe, R., Sonstebo, E. F. et al. 2012. Borehole Instability in Tertiary Shales in the Norwegian North Sea. Presented at the SPE Deepwater Drilling and Completions Conference, Galveston, Texas, 20–21 June. SPE-150714-MS. https://doi.org/10.2118/150714-MS.
Neuzil, C. E. 2000. Osmotic Generation of ‘‘Anomalous” Fluid Pressures in Geological Environments. Nature 403 (6766): 182–184. https://doi.org/10.1038/35003174.
Neuzil, C. E. and Provost, A. M. 2009. Recent Experimental Data May Point to a Greater Role for Osmotic Pressures in the Subsurface. Water Resour. Res. 45 (3): W03410. https://doi.org/10.1029/2007WR006450.
Salisbury, D. P., Ramos, G. G., and Wilton, B. S. 1991. Wellbore Instability of Shales Using a Downhole Simulation Test Cell. Presented at the 32nd US Symposium on Rock Mechanics (USRMS), Norman, Oklahoma, 10–12 July. ARMA-91-1015.
Simpson, J. P., Dearing, H. L., and Salisbury, D. P. 1989. Downhole Simulation Cell Shows Unexpected Effects of Shale Hydration on Borehole Wall (includes associated papers 19519 and 19885). SPE Drill Eng 4 (1): 24–30. SPE-17202-PA. https://doi.org/10.2118/17202-PA.
van Olphen, H. 1963. An Introduction to Clay Colloid Chemistry. New York City: Interscience Publishers.
van Oort, E. 1994. A Novel Technique for the Investigation of Drilling Fluid Induced Borehole Instability in Shales. Presented at Rock Mechanics in Petroleum Engineering, Delft, The Netherlands, 29–31 August. SPE-28064-MS. https://doi.org/10.2118/28064-MS.
van Oort, E. 2003. On the Physical and Chemical Stability of Shales. J. Pet. Sci. Eng. 38 (3–4): 213–235. https://doi.org/10.1016/S0920-4105(03)00034-2.
van Oort, E., Ahmad, M., Spencer, R. et al. 2015. ROP Enhancement in Shales Through Osmotic Processes. Presented at SPE/IADC Drilling Conference and Exhibition, London, 17–19 March. SPE-173138-MS. https://doi.org/10.2118/173138-MS.
van Oort, E., Hale, A. H., Mody, F. K. et al. 1996a. Transport in Shales and the Design of Improved Water-Based Shale Drilling Fluids. SPE Drill & Compl 11 (3): 137–146. SPE-28309-PA. https://doi.org/10.2118/28309-PA.
van Oort, E., Hoxha, B. B., Hale, A. H. et al. 2016. How to Test Fluids for Shale Compatibility. Presented at the 2016 American Association of Drilling Engineers Fluids Technical Conference and Exhibition, Houston, 12–13 April. AADE-16-FTCE-77.
van Oort, E., Ripley, D., Ward, I. et al. 1996b. Silicate-Based Drilling Fluids: Competent, Cost-Effective and Benign Solutions to Wellbore Stability Problems. Presented at SPE/IADC Drilling Conference, New Orleans, 12–15 March. SPE-35059-MS. https://doi.org/10.2118/35059-MS.