Cryogenic Fracturing of Wellbores Under True Triaxial-Confining Stresses: Experimental Investigation
- Minsu Cha (Texas A&M University) | Naif B. Alqahtani (King Abdulaziz City for Science and Technology) | Bowen Yao (Colorado School of Mines) | Xiaolong Yin (Colorado School of Mines) | Timothy J. Kneafsey (Lawrence Berkeley National Laboratory) | Lei Wang (Colorado School of Mines) | Yu-Shu Wu (Colorado School of Mines) | Jennifer L. Miskimins (Colorado School of Mines)
- Document ID
- Society of Petroleum Engineers
- SPE Journal
- Publication Date
- August 2018
- Document Type
- Journal Paper
- 1,271 - 1,289
- 2018.Society of Petroleum Engineers
- Well stimulation, Cryogenic Fracturing, Unconventional reservoir, Thermal shock, Shale and tight gas reservoirs
- 7 in the last 30 days
- 312 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 10.00|
|SPE Non-Member Price:||USD 30.00|
A laboratory study of cryogenic fracturing was performed to test its ability to improve oil/gas recovery from low-permeability reservoirs. Our objective is to develop well-stimulation technologies using cryogenic fluids [e.g., liquid nitrogen (LN)] to increase permeability in a large reservoir volume surrounding wells. The new technology has the potential to reduce formation damage caused by current stimulation methods and minimize or eliminate water usage.
The concept of cryogenic fracturing is that a sharp thermal gradient (thermal shock) created at the surfaces of formation rocks by applying cryogenic fluid can cause strong local tensile stress and start fractures. We developed a laboratory system for cryogenic fracturing under true-triaxial loading, with LN-delivery/control and -measurement systems. The loading system simulates confining stresses by independently loading each axis up to approximately 5,000 psi on 8x8x8-in. cubes. Temperature in boreholes and at block surfaces and fluid pressure in boreholes were continuously monitored. Acoustic and pressure-decay measurements were obtained before and at various stages of stimulations. Cubic blocks (8x8x8-in.) of Niobrara shale, concrete, and sandstones were tested, and stress levels and anisotropies varied. Three schemes were considered: gas fracturing without cryo-stimulation, gas fracturing after low-pressure cryogen flow-through, and gas fracturing after high-pressure cryogen flow-through.
Results from pressure-decay tests show that LN stimulation clearly increases permeability, and repeated stimulations further increase the permeability. Acoustic velocities and amplitudes decreased significantly after cryo-stimulation, indicating fracture creation. In the gas fracturing without the stimulation, breakdown (complete fracturing) occurs suddenly without any initial leaking, and major fracture planes form along the plane containing principal-stress and intermediate-stress directions, as expected theoretically. However, in the gas fracturing after cryogenic stimulations, breakdown occurred gradually and with massive leaking because of thermal fractures created during stimulation. In addition, the major fracture direction does not necessarily follow the plane containing the principal-stress direction, especially at low confining-stress levels. In tests, we observed that cryogenic stimulation seems to disrupt the internal stress field. The increase in borehole temperature after stimulation affects the permeability of the specimen. When a stimulated specimen is still cold, it maintains high permeability because fractures remain open and local thermal tension is maintained near the borehole. When the rock warms back, fractures close and permeability decreases. In these tests, we have not used proppants. Overall, fractures are clearly generated by low- and high-pressure thermal shocks. The added pressure of the high-pressure thermal shocks helps to further propagate cryogenic fractures generated by thermal shock. Breakdown pressure is significantly lowered by LN stimulation, with observed breakdown-pressure reductions up to approximately 40%.
|File Size||1 MB||Number of Pages||19|
Abel, J. C. 1981. Application of Nitrogen Fracturing in the Ohio Shale. Presented at the SPE Eastern Regional Meeting, Columbus, Ohio, 4–6 November. SPE-10378-MS. https://doi.org/10.2118/10378-MS.
Alqatahni, N. B., Cha, M., Yao, B. et al. 2016. Experimental Investigation of Cryogenic Fracturing of Rock Specimens Under True Triaxial-Confining Stresses. Presented at SPE Europec featured at 78th EAGE Conference and Exhibition, Vienna, Austria, 30 May–2 June. SPE-180071-MS. https://doi.org/10.2118/180071-MS.
ASTM D3967-16, Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens. 2008. Conshohocken, Pennsylvania: ASTM International.
ASTM C192/C192M-16a, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. 2014a. Conshohocken, Pennsylvania: ASTM International.
ASTM D7012-14e1, Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens Under Varying States of Stress and Temperatures. 2014b. Conshohocken, Pennsylvania: ASTM International.
Beugelsdijk, L. J. L., de Pater, C. J., and Sato, K. 2000. Experimental Hydraulic Fracture Propagation in a Multi-Fractured Medium. Presented at the SPE Asia Pacific Conference on Integrated Modelling for Asset Management, Yokohama, Japan, 25–26 April. SPE-59419-MS. https://doi.org/10.2118/59419-MS.
Bohloli, B. and de Pater, C. J. 2006. Experimental Study on Hydraulic Fracturing of Soft Rocks: Influence of Fluid Rheology and Confining Stress. J. Pet. Sci. Eng. 53 (1–2): 1–12. https://doi.org/10.1016/j.petrol.2006.01.009.
Cha, M. and Cho, G. C. 2007. Compression Wave Velocity of Cylindrical Rock Specimens: Engineering Modulus Interpretation. Japan. J. Appl. Phys. 46 (1): 4497–4499. https://doi.org/10.1143/JJAP.46.4497.
Cha, M., Alqahtani, N., Yao, B. et al. 2016a. Studying Cryogenic Fracturing Process Using Transparent Specimens. Proc., 1st International Conference on Energy Geotechnics, Kiel, Germany, 29–31 August, 211–216.
Cha, M., Alqahtani, N. B., Yao, B. et al. 2016b. Development of Laboratory System for Cryogenic Fracturing Study. Proc., 1st International Conference on Energy Geotechnics, Kiel, Germany, 29–31 August, 381–388.
Cha, M., Alqahtani, N. B., Yin, X. et al. 2017. Laboratory System for Studying Cryogenic Thermal Rock Fracturing for Well Stimulation. J. Pet. Sci. Eng. 156 (July): 780–789. https://doi.org/10.1016/j.petrol.2017.06.062.
Cha, M., Cho, G. C., and Santamarina, J. C. 2009. Long-Wavelength P-Wave and S-Wave Propagation in Jointed Rock Masses. Geophysics 74 (5): E205–E214. https://doi.org/10.1190/1.3196240.
Cha, M., Yin, X., Kneafsey, T. et al. 2014. Cryogenic Fracturing for Reservoir Stimulation—Laboratory Studies. J. Pet. Sci. Eng. 124 (December): 436–450. https://doi.org/10.1016/j.petrol.2014.09.003.
Chen, G. and Ewy, R. T. 2005. Thermoporoelastic Effect on Wellbore Stability. SPE J. 10 (2): 121–129. SPE-89039-PA. https://doi.org/10.2118/89039-PA.
Clancy, J. P. and Gilchrist, R. E. 1983. Nitrogen Injection Applications Emerge in the Rockies. Presented at the SPE Rocky Mountain Regional Meeting, Salt Lake City, Utah, 22–25 May. SPE-11848-MS. https://doi.org/10.2118/11848-MS.
Dahi Taleghani, A., Ahmadi, M., Wang, W. et al. 2014. Thermal Reactivation of Microfractures and Its Potential Impact on Hydraulic-Fracture Efficiency. SPE J. 19 (5): 761–770. SPE-163872-PA. https://doi.org/10.2118/163872-PA.
Detournay, E. and Carbonell, R. 1997. Fracture-Mechanics Analysis of the Breakdown Process in Minifracture or Leakoff Test. SPE Prod & Fac 12 (3): 195–199. SPE-28076-PA. https://doi.org/10.2118/28076-PA.
Detournay, E. and Cheng, A.-D. 1988. Poroelastic Response of a Borehole in a Non-Hydrostatic Stress Field. Int. J. Rock Mech. Min. 25 (3): 171–182. https://doi.org/10.1016/0148-9062(88)92299-1.
Enayatpour, S. and Patzek, T. 2013. Thermal Shock in Reservoir Rock Enhances the Hydraulic. Presented at the Unconventional Resources Technology Conference, Denver, 12–14 August. URTEC-1620617-MS.
Fan, K. 2007. Price of Liquid Nitrogen. The Physics Factbook, www.hypertextbook.com/facts/2007/KarenFan.shtml (accessed 30 January 2018).
Fenghour, A., Wakeham, W. A., and Vesovic, V. 1998. The Viscosity of Carbon Dioxide. J. Phys. Chem. Ref. Data 27 (1): 31–44. https://doi.org/10.1063/1.556013.
Freeman, E. R., Abel, J. C., Kim, C. M. et al. 1983. A Stimulation Technique Using Only Nitrogen. J Pet Technol 35 (12): 2165–2174. SPE-10129-PA. https://doi.org/10.2118/10129-PA.
Gottschling, J. C. and Royce, T. N. 1985. Nitrogen Gas and Sand: A New Technique for Stimulation of Devonian Shale. J Pet Technol 37 (5): 901–907. SPE-12313-PA. https://doi.org/10.2118/12313-PA.
Grundmann, S. R., Rodvelt, G. D., Dials, G. A. et al. 1998. Cryogenic Nitrogen as a Hydraulic Fracturing Fluid in the Devonian Shale. Presented at the SPE Eastern Regional Meeting, Pittsburgh, Pennsylvania, 9–11 November. SPE-51067-MS. https://doi.org/10.2118/51067-MS.
Guo, F., Morgenstern, N. R., and Scott, J. D. 1993. Interpretation of Hydraulic Fracturing Breakdown Pressure. Int. J. Rock Mech. Min. 30 (6): 617–626. https://doi.org/10.1016/0148-9062(93)91221-4.
Guo, T., Zhang, S., Qu, Z. et al. 2014. Experimental Study of Hydraulic Fracturing for Shale by Stimulated Reservoir Volume. Fuel 128 (15 July): 373–380. https://doi.org/10.1016/j.fuel.2014.03.029.
Gupta, D. V. S. and Bobier, D. M. 1998. The History and Success of Liquid CO2 and CO2/N2 Fracturing System. Presented at the SPE Gas Technology Symposium, Calgary, 15–18 March. SPE-40016-MS. https://doi.org/10.2118/40016-MS.
Haimson, B. C. and Zhao, Z. 1991. Effect of Borehole Size and Pressurization Rate on Hydraulic Fracturing Breakdown Pressure. Presented at the 32nd US Symposium on Rock Mechanics (USRMS), Norman, Oklahoma, 10–12 July. ARMA-91-191.
Hosseini, S. M., Neuhaus, C. W., and Aminzadeh, F. 2014. Effect of Fluid Rheology and Reservoir Compressibility on Microseismicity During Hydraulic Fracturing. Presented at the SPE Annual Technical Conference and Exhibition, Amsterdam, 27–29 October. SPE-170897-MS. https://doi.org/10.2118/170897-MS.
Hubbert, M. K. and Willis, D. G. 1957. Mechanics of Hydraulic Fracturing. SPE-686-G.
Ito, T., Hayashi, K., and Abe, H. 1990. Scale Effect in Breakdown Pressure of Hydraulic Fracturing Stress Measurements. Proc., Scale Effects in Rock Masses: Proceedings of the First International Workshop on Scale Effects in Rock Masses, Loen, Norway, 7–8 June, 289–295. Rotterdam, The Netherlands: AA Balkema.
Kendrick, D., Puskar, M., and Schlotterbeck, S. T. 2005. Ultralightweight Proppants: A Field Study in the Big Sandy Field of Eastern Kentucky. Presented at the SPE Eastern Regional Meeting, Morgantown, West Virginia, 14–16 September. SPE-98006-MS. https://doi.org/10.2118/98006-MS.
King, G. E. 2010. Thirty Years of Gas Shale Fracturing: What Have We Learned? Presented at the SPE Annual Technical Conference and Exhibition, Florence, Italy, 19–22 September. SPE-133456-MS. https://doi.org/10.2118/133456-MS.
King, S. R. 1983. Liquid CO2 for the Stimulation of Low-Permeability Reservoirs. Presented at the SPE/DOE Low Permeability Gas Reservoirs Symposium, Denver, 14–16 March. SPE-11616-MS. https://doi.org/10.2118/11616-MS.
Lecampion, B., Desroches, J., Jeffrey, R. et al. 2016. Experiments versus Theory for the Initiation and Propagation of Radial Hydraulic Fractures in Low Permeability Materials. J. Geophys. Res.-Sol. Ea. 122 (2): 1239–1263. https://doi.org/10.1002/2016JB013183.
Lhomme, T., Detournay, E., and Jeffrey, R. 2005. Effect of Fluid Compressibility and Borehole Radius on the Propagation of a Fluid-Driven Fracture. Oral presentation given at the 11th International Conference on Fracture, Turin, Italy, 20–25 March.
Li, X., Cui, L., and Roegiers, J.-C. 1998. Thermoporoelastic Modelling of Wellbore Stability in Non-Hydrostatic Stress Field. Int. J. Rock Mech. Min. 35 (4–5): 584. https://doi.org/10.1016/S0148-9062(98)00079-5.
Lillies, A. T. and King, S. R. 1982. Sand Fracturing With Liquid Carbon Dioxide. Presented at the SPE Production Technology Symposium, Hobbs, New Mexico, 8–9 November. SPE-11341-MS. https://doi.org/10.2118/11341-MS.
Mazza, R. L. 1997. Liquid CO2 Improves Fracturing. Hart’s Oil and Gas World, Vol. 22. Houston: Hart Publications.
McDaniel, B. W., Grundmann, S. R., Kendrick, W. D. et al. 1997. Field Applications of Cryogenic Nitrogen as a Hydraulic Fracturing Fluid. Presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 5–8 October. SPE-38623-MS. https://doi.org/10.2118/38623-MS.
Nicot, J.-P. and Scanlon, B. R. 2012. Water Use for Shale-Gas Production in Texas, US. Environ. Sci. Technol. 46 (6): 3580–3586. https://doi.org/10.1021/es204602t.
Perkins, T. and Gonzalez, J. 1985. The Effect of Thermoelastic Stresses on Injection Well Fracturing. SPE J. 25 (1): 78–88. SPE-11332-PA. https://doi.org/10.2118/11332-PA.
Rudenko, N. S. and Schubnikow, L. W. 1968. The Viscosity of Liquid Nitrogen, Carbon Monoxide, Argon, and Oxygen as a Function of Temperature. Report NASA-TT-F-11-868.
Salimzadeh, S., Paluszny, A., and Zimmerman, R. 2016. Thermal Effects During Hydraulic Fracturing in Low-Permeability Brittle Rocks. Presented at the 50th US Rock Mechanics/Geomechanics Symposium, Houston, 26–29 June. ARMA-2016-368.
Shaefer, M. T. 2005. Are Slick Water-Fracturing Applications Effective in the J-Sand Formation? Presented at the SPE Annual Technical Conference and Exhibition, Dallas, 9–12 October. SPE-96933-MS. https://doi.org/10.2118/96933-MS.
Sharma, M. M., Gadde, P. B., Sullivan, R. et al. 2004. Slick Water and Hybrid Fracs in the Bossier: Some Lessons Learnt. Presented at the SPE Annual Technical Conference and Exhibition, Houston, 26–29 September. SPE-89876-MS. https://doi.org/10.2118/89876-MS.
Sheahen, T. 1994. Introduction to High-Temperature Superconductivity. New York City: Springer Science & Business Media.
Shimizu, H., Murata, S., and Ishida, T. 2011. The Distinct Element Analysis for Hydraulic Fracturing in Hard Rock Considering Fluid Viscosity and Particle Size Distribution. Int. J. Rock Mech. Min. 48 (5): 712–727. https://doi.org/10.1016/j.ijrmms.2011.04.013.
Steward, D. B. 2013. George P. Mitchell and the Barnett Shale. J Pet Technol 65 (11): 58–68. SPE-1113-0058-JPT. https://doi.org/10.2118/1113-0058-JPT.
Tarasovs, S. and Ghassemi, A. 2011. Propagation of a System of Cracks Under Thermal Stress. Presented at the 45th US Rock Mechanics/Geomechanics Symposium, San Francisco, 26–29 June. ARMA-11-558.
Tarasovs, S. and Ghassemi, A. 2014. Self-Similarity and Scaling of Thermal Shock Fractures. Phys. Rev. E 90 (1): 012403. https://doi.org/10.1103/PhysRevE.90.012403.
Wang, L., Yao, B., Cha, M. et al. 2016. Waterless Fracturing Technologies for Unconventional Reservoirs-Opportunities for Liquid Nitrogen. J. Nat. Gas Sci. Eng. 35 (A): 160–174. https://doi.org/10.1016%2Fj.jngse.2016.08.052.
Wilson, D. R., Siebert, R. M., and Lively, P. 1995. Cryogenic Coal Bed Gas Well Stimulation Method. US Patent No. 5,464,061.
Wu, B., Zhang, X., and Jeffrey, R. 2010. A Thermo-Poro-Elastic Analysis of Stress Fields Around a Borehole. Presented at the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, Utah, 27–30 June. ARMA-10-442.
Wu, B., Zhang, X., and Jeffrey, R. G. 2016. Analysis of Thermal Effects on Hydraulic Fracturing Near a Horizontal Well by Using Displacement Discontinuity Method. Presented at the SPE Asia Pacific Hydraulic Fracturing Conference, Beijing, 24–26 August. SPE-181865-MS. https://doi.org/10.2118/181865-MS.
Zhang, X., Jeffrey, R. G., and Wu, B. 2014. Crack Propagation From a Surface Assisted by Fluid Pressure and Cooling. Presented at the 48th US Rock Mechanics/Geomechanics Symposium, Minneapolis, Minnesota, 1–4 June. ARMA-2014-6995.
Zhang, X., Lu, Y., Tang, J. et al. 2017. Experimental Study on Fracture Initiation and Propagation in Shale Using Supercritical Carbon Dioxide Fracturing. Fuel 190 (15 February): 370–378. https://doi.org/10.1016/j.fuel.2016.10.120.
Zoback, M. D. 2010. Reservoir Geomechanics. Cambridge, UK: Cambridge University Press.