Acid Fracturing in Shales: Effect of Dilute Acid on Properties and Pore Structure of Shale
- Weiwei Wu (University of Texas at Austin) | Mukul M. Sharma (University of Texas at Austin)
- Document ID
- Society of Petroleum Engineers
- SPE Production & Operations
- Publication Date
- February 2017
- Document Type
- Journal Paper
- 51 - 63
- 2017.Society of Petroleum Engineers
- Pore structure, Acid fracturing, Microstructure, Shale, Mechanical Properties
- 6 in the last 30 days
- 1,022 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 10.00|
|SPE Non-Member Price:||USD 30.00|
Many of the microfractures created during hydraulic fracturing are too small to be filled with proppants and are likely closed during production. However, for some shales that are rich in calcite (calcareous mudstones), such as the Bakken and Eagle Ford shale, dilute acids can be used while fracturing to maintain the conductivity of these microfractures under closure stress by nonuniformly etching the fracture surfaces. The mineralogy and pore structure of the shale and their evolution during acid fracturing are critical factors on the surface-etching profile and the fluid leakoff. Therefore, understanding how acid dissolution changes the microstructure, petrophysical properties, and pore structures of shale is essential in the design and application of acid fracturing in shales.
In this paper, in-situ changes of microstructure and pore structure in shale before and after acid fracturing were demonstrated and visually compared for the first time, with a carefully designed microscopy work flow. Acidized sections of a shale core sample were meticulously isolated, and its microstructure, pore structure, and petrophysical properties were systematically studied and compared with nonacidized sections of the core. Evolution of mechanical properties of shale during acid treatment was also investigated.
Microstructure changes were found to be strongly dependent on mineral distribution, and several patterns were identified: channels developed in carbonate-rich regions; cavities or grooves formed in carbonate-rich islands or carbonate rings; and surface roughness created in mixed zones of scattered carbonate and inert minerals. Inert minerals such as clay and organic matter (OM) stay relatively undisturbed in the structure, while some mineral grains can be dislodged from their original locations by dissolution of the surrounding carbonates. Many macropores with sizes up to 120 mm were created, and mesopores mostly associated with clay gained more accessibility. Significantly increased permeability and porosity were measured in an acidized shale matrix. Indentation hardness measurements show that, as expected, the hardness of the shale was reduced by acidizing. This means that for acidizing to work effectively, it is important not to etch the fracture surfaces uniformly. Doing so will result in a reduction in the fracture conductivity under stress. The microstructure changes introduced by acid fracturing demonstrated in this study will result in the formation of surface asperities, which is likely to improve the fracture conductivity of induced unpropped fractures. The acidized shale matrix close to the fracture surface with increased abundance of macropores and accessibility to mesopores may serve as a preferred pathway for fluid flow, as well.
|File Size||6 MB||Number of Pages||13|
Al-Bazali, T. M., Zhang, J., Chenevert, M. E. et al. 2006. Factors Controlling the Membrane Efficiency of Shales When Interacting With Water-Based and Oil-Based Muds. Presented at the SPE International Oil & Gas Conference and Exhibition, Beijing, 5–7 December. SPE-100735-MS. http://dx.doi.org/10.2118/100735-MS.
Comisky, J. T., Santiago, M., McCollom, B. et al. 2011. Sample Size Effects on the Application of Mercury Injection Capillary Pressure for Determining the Storage Capacity of Tight Gas and Oil Shales. Presented at the Canadian Unconventional Resources Conference, Calgary, 15–17 November. SPE-149432-MS. http://dx.doi.org/10.2118/149432-MS.
Deng, J., Mou, J., Hill, A. D. et al. 2012. A New Correlation of Acid-Fracture Conductivity Subject to Closure Stress. SPE Prod & Oper 27 (2):158–169. SPE-140402-PA. http://dx.doi.org/10.2118/140402-PA.
Dong, C., Hill, A. D., and Zhu, D. 1999. Acid Etching Patterns in Naturally-Fractured Formations. Presented at the SPE Annual Technical Conference and Exhibition. Houston, 3–6 October. SPE-56531-MS. http://dx.doi.org/10.2118/56531-MS.
Fisher, M. K., Wright, C. A., Davidson, B. M. et al. 2005. Integrating Fracture Mapping Technologies To Improve Stimulations in the Barnett Shale. SPE Prod & Fac 20 (2): 85–93. SPE-77441-PA. http://dx.doi.org/10.2118/77441-PA.
Gale, J. F. W., Reed, R. M., and Holder, J. 2007. Natural Fractures in the Barnett Shale and Their Importance for Hydraulic Fracture Treatments. AAPG Bulletin 91 (4): 603–622. http://dx.doi.org/10.1306/11010606061.
Gasparrini, M., Sassi, W., and Gale, J. F. W. 2014. Natural Sealed Fractures in Mudrocks: A Case Study Tied to Burial History From the Barnett Shale, Fort Worth Basin, Texas, USA. Marine and Petroleum Geology 55: 122–141. http://dx.doi.org/10.1016/j.marpetgeo.2013.12.006.
Gong, M., Lacote, S., and Hill, A. D. 1999. New Model of Acid-Fracture Conductivity Based on Deformation of Surface Asperities. SPE J. 4 (3): 206–214. SPE-57017-PA. http://dx.doi.org/10.2118/57017-PA.
Groen, J. C., Peffer, L. A. A., and Pe´rez-Rami´rez, J. 2003. Pore Size Determination in Modified Micro- and Mesoporous Materials. Pitfalls and Limitations in Gas Adsorption Data Analysis. Microporous and Mesoporous Materials 60 (1–3): 1–17. http://dx.doi.org/10.1016/S1387-1811(03)00339-1.
Hoefner, M. and Fogler, H. S. 1988. Pore Evolution and Channel Formation During Flow and Reaction in Porous Media. AIChE Journal 34 (1): 45–54. http://dx.doi.org/10.1002/aic.690340107.
Kuila, U. and Prasad, M. 2013. Specific Surface Area and Pore-Size Distribution in Clays and Shales. Geophysical Prospecting 61 (2): 341–362. http://dx.doi.org/10.1111/1365-2478.12028.
Loucks, R. G., Reed, R. M., Ruppel, S. C. et al. 2012. Spectrum of Pore Types and Networks in Mudrocks and a Descriptive Classification for Matrix-Related Mudrock Pores. AAPG Bulletin 96 (6): 1071–1098. http://dx.doi.org/10.1306/08171111061.
Manchanda, R., Sharma, M. M., and Holzhauser, S. 2014. Time-Dependent Fracture-Interference Effects in Pad Wells. SPE Prod & Oper 29 (4): 274–287. SPE-164534-PA. http://dx.doi.org/10.2118/164534-PA.
Morsy, S., Sheng, J. J., Hetherington, C. J. et al. 2013. Impact of Matrix Acidizing on Shale Formations. Presented at the SPE Nigeria Annual International Conference and Exhibition, Lagos, 5–7 August. SPE-167568-MS. http://dx.doi.org/10.2118/167568-MS.
Mou, J., Hill, A. D., and Zhu, D. 2007. The Velocity Field and Pressure-Drop Behavior in a Rough-Walled Fracture. Presented at the SPE Hydraulic Fracturing Technology Conference, College Station, Texas, USA, 29–31 January. SPE-105182-MS. http://dx.doi.org/10.2118/105182-MS.
Mou, J., Zhu, D., and Hill, A. D. 2010. Acid-Etched Channels in Heterogeneous Carbonates—A Newly Discovered Mechanism for Creating Acid-Fracture Conductivity. SPE J. 15 (2): 404–416. SPE-119619-PA. http://dx.doi.org/10.2118/119619-PA.
Nasr-El-Din, H. A., Al-Driweesh, S. M., Metcalf, A. S. et al. 2008. Fracture Acidizing: What Role Does Formation Softening Play in Production Response? SPE Prod & Oper 23 (2): 184–191. SPE-103344-PA. http://dx.doi.org/10.2118/103344-PA.
Nelson, P. H. 2009. Pore-Throat Sizes in Sandstones, Tight Sandstones, and Shales. AAPG Bulletin 93 (3): 329–340. http://dx.doi.org/10.1306/10240808059.
Nelson, R. A. 2001. Geologic Analysis of Naturally Fractured Reservoirs, second edition, Chapter 1, 77–79. Woburn, Massachusetts: Gulf Professional Publishing.
Nierode, D. E. and Kruk, K. F. 1973. An Evaluation of Acid Fluid Loss Additives, Retarded Acids, and Acidized Fracture Conductivity. Presented at the Fall Meeting of the Society of Petroleum Engineers of AIME, Las Vegas, Nevada, USA, 30 September–3 October. SPE-4549-MS. http://dx.doi.org/10.2118/4549-MS.
Nieto, C. M., Pournik, M., and Hill, A. D. 2008. The Texture of Acidized Fracture Surfaces: Implications for Acid Fracture Conductivity. SPE Prod & Oper 23 (3): 343–352. SPE-102167-PA. http://dx.doi.org/10.2118/102167-PA.
Oeth, C. V., Hill, A. D., and Zhu, D. 2014. Acid Fracture Treatment Design With Three-Dimensional Simulation. Presented at the SPE Hydraulic Fracturing Technology Conference, The Woodlands, Texas, USA, 4–6 February. SPE-168602-MS. http://dx.doi.org/10.2118/168602-MS.
Oliver, W. C. and Pharr, G. M. 2004. Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology. Journal of Materials Research 19 (1): 3–20. http://dx.doi.org/10.1557/jmr.2004.19.1.3.
Pournik, M., Zhu, D., and Hill, A. D. 2009. Acid-Fracture Conductivity Correlation Development Based on Acid-Fracture Characterization. Presented at the 8th European Formation Damage Conference, Scheveningen, The Netherlands, 27–29 May. SPE-122333-MS. http://dx.doi.org/10.2118/122333-MS.
Rouquerol, J., Avnir, D., Fairbridge, C. W. et al. 1994. Recommendations for the Characterization of Porous Solids. Pure & Appl. Chem. 66 (8): 1739-1758. http://dx.doi.org/10.1351/pac199466081739.
Ruffet, C., Fery, J. J., and Onaisi, A. 1998. Acid Fracturing Treatment: A Surface-Topography Analysis of Acid-Etched Fractures To Determine Residual Conductivity. SPE J. 3 (2): 155–162. SPE-38175-PA. http://dx.doi.org/10.2118/38175-PA.
Sayed, M. A. I. and Nasr-El-Din, H. A. 2013. Acid Treatments in High Temperature Dolomitic Carbonate Reservoirs Using Emulsified Acids: A Coreflood Study. Presented at the SPE Production and Operations Symposium, Oklahoma City, Oklahoma, USA, 23–26 March. SPE-164487-MS. http://dx.doi.org/10.2118/164487-MS.
Sing, K. S. W. 1985. Reporting Physisorption Data for Gas/Solid Systems With Special Reference to the Determination of Surface Area and Porosity (Recommendations 1984). Pure & Appl. Chem. 57 (4): 603–619. http://dx.doi.org/10.1351/pac198557040603.
Sondergeld, C. H., Ambrose, R. J., Rai, C. S. et al. 2010. Micro-Structural Studies of Gas Shales. Presented at SPE Unconventional Gas Conference, Pittsburgh, Pennsylvania, USA, 23–25 February. SPE-131771-MS. http://dx.doi.org/10.2118/131771-MS.
Tripathi, D. and Pournik, M. 2014. Effect of Acid on Productivity of Fractured Shale Reservoirs. Presented at the SPE/AAPG/SEG Unconventional Resources Technology Conference, Denver, 25–27 August. SPE-2014-1922960-MS. http://dx.doi.org/10.15530/urtec-2014-1922960.