Asphaltene Precipitation During Bitumen Extraction With Expanding-Solvent Steam-Assisted Gravity Drainage: Effects on Pore-Scale Displacement
- Albina Mukhametshina (Texas A&M University) | Taniya Kar (Texas A&M University) | Berna Hascakir (Texas A&M University)
- Document ID
- Society of Petroleum Engineers
- SPE Journal
- Publication Date
- April 2016
- Document Type
- Journal Paper
- 380 - 392
- 2016.Society of Petroleum Engineers
- expanding solvent-SAGD (ES-SAGD), bitumen, cyclic solvent injection, steam-assisted gravity drainage (SAGD), asphaltene
- 1 in the last 30 days
- 579 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 35.00|
Steam-assisted gravity drainage (SAGD) is a proved enhanced-oil-recovery technique for oil-sand extraction. However, the environmental and the economic challenges associated with steam generation limit the application of this technology. To address these issues, we have investigated the effectiveness of expanding-solvent-SAGD (ES-SAGD) over base SAGD on a bitumen sample (8.8 °API). Experimental studies are conducted with a 2D physical model. Different strategies for solvent injection are tested (coinjection and cyclic injection) to examine the impact of the deposition of the asphaltene fraction of the bitumen on porous media and the behavior of the asphaltene fraction in produced oil. Toluene is used as asphaltene-soluble solvent, and n-hexane is selected as asphaltene-insoluble. Steam-chamber development is monitored with temperature profiles from 47 separate positions. The oil rate, recovery factor, and the produced-oil quality are evaluated together. The effectiveness of SAGD and ES-SAGD is discussed by considering the role of asphaltenes and their interactions with clays in both produced- and residual-oil samples. This study reveals that coinjection of hydrocarbon solvents with steam enhances the steam-chamber development with higher oil-production rate. Moreover, ES-SAGD results in recovery of more-upgraded oil and has a lesser environmental impact. We observe that the selections of solvent type and injection strategy are the most crucial parameters for the design of a hybrid SAGD process, and solvent cost and toxicity can be minimized with the recycling of solvent for continuous injection of solvents. High-energy consumption for steam generation during the SAGD process can be reduced by coinjection of proper solvent type with steam at a proper injection strategy. Our study reveals that the ES-SAGD process has environmental and economic benefits that are preferable to those of the base SAGD. However, some solvents can cause undesirable effects because of asphaltene destabilization and precipitation in production or transportation lines. The results of this work show that not only asphaltenes but also the other fractions of oil, along with the reservoir-clay type and the clay amount, affect the ES-SAGD performance.
|File Size||2 MB||Number of Pages||13|
Alfa Aesar—A Johnson Matthey Company. 2013. http://www.alfa.com/ (accessed 3 June 2013).
Amyx, J. W., Bass, D. M., and Whiting, R. L. 1960. Petroleum Reservoir Engineering. Vol. 1. McGraw-Hill College.
ASTM. 2011. ASTM D2007-11: Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method.
Ayodele, O. R., Nasr, T. N., Ivory, J. et al. 2010. Testing and History Matching of ES-SAGD (Using Hexane). Presented at the SPE Western Regional Meeting, Anaheim, California, USA, 27–29 May. SPE-134002-MS. http://dx.doi.org/10.2118/134002-MS.
Bayliss, P. and Levinson, A. A. 1976. Mineralogical Review of the Alberta Oil Sand Deposits (Lower Cretaceous, Mannville Group). Bull. of Canadian Petroleum Geology 24 (2): 211–224.
Butler, R. M., McNab, G. S., and Lo, H. Y. 1981. Theoretical Studies on the Gravity Drainage of Heavy Oil During In-Situ Steam Heating. The Canadian Journal of Chemical Engineering 59 (4): 455–460. http://dx.doi.org/10.1002/cjce.5450590407.
Butler, R. M. and Stephenes, D. J. 1981. The Gravity Drainage of Steam-Heated Heavy Oil to Parallel Horizontal Wells. J Can Pet Technol 20 (2). SPE-81-02-07-PA. http://dx.doi.org/10.2118/81-02-07-PA.
Butler, R. M. 1982. A Method for Continuously Producing Viscous Hydrocarbons by Gravity Drainage While Injecting Heated Fluids. US Patent No. 4,344,485.
Butler, R. M. 1991. Thermal Recovery of Oil and Bitumen. New Jersey: Prentice Hall. OSTI ID: 5797813.
Butler, R. M. 2001. Some Recent Developments in SAGD. J Can Pet Technol 40 (1). SPE-01-01-PA. http://dx.doi.org/10.2118/01-01-PA.
Calles, J. A., Dufour, J., Marugan, J. et al. 2008. Properties of Asphaltenes Precipitated With Different n-Alkanes. A Study To Assess the Most Representative Species for Modelling. Energy Fuels 22 (2): 763–769. http://dx.doi.org/10.1021/ef700404p.
Chan, M. Y. S., Fong, J., and Leshchyshyn, T. 1997. Effects of Well Placement and Critical Operating Conditions on the Performance of Dual Well SAGD Pair in Heavy Oil Reservoirs. Presented at the 5th Latin American and Caribbean Petroleum Engineering Conference and Exhibition, Rio de Janeiro, 30 August–3 September. SPE-39082-MS. http://dx.doi.org/10.2118/39082-MS.
Chen, Q., Gerritsen, M. G., and Kovsek, A. R. 2007. Effect of Reservoir Heterogeneities on the Steam-Assisted Gravity Drainage Process. Presented at the SPE Annual Technical Conference and Exhibition, Anaheim, California, USA, 11–14 November. SPE-109873-MS. http://dx.doi.org/10.2118/109873-MS.
CHERIC. 2013. Base Component Properties, http://www.cheric.org/research/kdb/hcprop/cmpsrch.php (accessed 13 May 2013).
Chung, K. H. and Butler, R. M. 1988. Geometrical Effect of Steam Injection on the Formation of Emulsions in the Steam-Assisted Gravity Drainage Process. J Can Pet Technol 27 (1). SPE-88-01-02-PA. http://dx.doi.org/10.2118/88-01-02-PA.
Collins, P. M. 2007. The False Lucre of Low-Pressure SAGD. J Can Pet Technol 46 (1). SPE-07-01-02-PA. http://dx.doi.org/10.2118/07-01-02-PA.
Cosultchi, A., Bosch, P., and Lara, V. H. 2003. Small-Angle X-Ray Scattering Study of Oil- and Deposit-Asphaltene Solutions. Colloid and Polymer Sci. 281 (4): 325–330. http://dx.doi.org/10.1007/s00396-002-0772-2.
Das, S. K. and Butler, R. M. 1994. Effect of Asphaltene Deposition on the VAPEX Process: A Preliminary Investigation Using a Hele-Shaw Cell. J Can Pet Technol 33 (6). SPE-94-06-06-PA. http://dx.doi.org/10.2118/94-06-06-PA.
Edmunds, N. and Chhina, H. 2001. Economic Optimum Operating Pressure for SAGD Projects in Alberta. J Can Pet Technol 40 (12). SPE-01-12-PA. http://dx.doi.org/10.2118/01-12-PA.
Gonzalez, G., Sousa, M. A., and Lucas, E. F. 2006. Asphaltenes Precipitation From Crude Oil and Hydrocarbon Media. Energy Fuels 20 (6): 2544–2551. http://dx.doi.org/10.1021/ef060220j.
Gooble, L. and Good, W. K. 1994. Shell/Alberta Department of Energy Peace River Horizontal Well Demonstration Project—A Test of the Enhanced Steam-Assisted Gravity-Drainage Process. Presented at the Annual Technical Meeting, Calgary, 12–15 June. SPE-94-41-PA. http://dx.doi.org/10.2118/94-41-PA.
Grainger Industrial Supply. 2013. http://www.grainger.com/Grainger/wwg/start.shtml (accessed 8 March 2013).
Gray, M. R. 1994. Upgrading Petroleum Residues and Heavy Oils. New York: Marcel Dekker, Inc.
Green, D. W. and Willhite, G. P. 1998. Enhanced Oil Recovery, Vol. 6, Richardson, Texas: SPE Textbook Series.
Grills, T. L., Vandal, B., Hallum, F. et al. 2002. Case History: Horizontal-Well SAGD Technology Is Successfully Applied to Produce Oil at LAK Ranch in Newcastle Wyoming. Presented at the SPE International Thermal Operations and Heavy Oil Symposium and International Horizontal Well Technology Conference, Calgary, 4–7 November. SPE-78964-MS. http://dx.doi.org/10.2118/78964-MS.
Gupta, S. C., Gittins, S. D., and Picherack, P. 2003. Insights Into Some Key Issue With Solvent-Aided Process. J Can Pet Technol 43 (2): 54–61. SPE-04-02-05-PA. http://dx.doi.org/10.2118/04-02-05-PA.
Haghighat, P. and Maini, B. B. 2010. Role of Asphaltene Precipitation in VAPEX Process. J Can Pet Technol 49 (3). SPE-134244-PA. http://dx.doi.org/10.2118/134244-PA.
Hamm, R. A. and Ong, T. S. 1995. Enhanced Steam-Assisted Gravity Drainage: A New Horizontal Well Recovery Process for Peace River, Canada. J Can Pet Technol 34 (4). SPE-95-04-03-PA. http://dx.doi.org/10.2118/95-04-03-PA.
Hein, F. J. and Marsh, R. A. 2008. Regional Geologic Framework, Depositional Models, and Resource Estimates of the Oil Sands of Alberta, Canada. Presented at the World Heavy Oil Congress, Edmonton, Alberta, Canada, 10–12 March. ETDEWEB ID: 21025370.
Henderson, J. H. and Weber, L. 1965. Physical Upgrading of Heavy Crude Oils by the Application of Heat. J Can Pet Technol 4 (10–12): 206–212. SPE-65-04-05-PA. http://dx.doi.org/10.2118/65-04-05-PA.
Hodgman, C. D (Ed.). 1962. Handbook of Chemistry and Physics, forty-fourth edition. Cleveland, Ohio: CRC Press.
Huc, A. 2011. Heavy Crude Oils. From Geology to Upgrading: An Overview. Paris: Editions Technip.
Ibatullin, R. R., Amerkhanov, M. I., and Ibragimov, N. G. 2007. Development of Steam-Assisted Gravity-Drainage Technology as an Example of Ashalchinskoye Heavy Oilfield Performance. Oil Industry 1 (7).
Ibatullin, T. and Zolotukhin, A. B. 2009. Optimization of Solvent-Based Enhancements of Steam-Assisted Gravity Drainage. Presented at the 15th European Symposium on Improved Oil Recovery, Paris, 27 April. http://dx.doi.org/10.3997/2214-4609.201404852.
Kar, T., Williamson, M., and Hascakir, B. 2014. The Role of Asphaltenes in Emulsion Formation for Steam-Assisted Gravity Drainage (SAGD) and Expanding Solvent-SAGD (ES-SAGD). Presented at the SPE Heavy and Extra Heavy Oil Conference: Latin America, Medellin, Colombia, 24–26 September.. SPE-171076-MS. http://dx.doi.org/10.2118/171076-MS.
Leontaritis, K., Amaefule, J., and Charles, R. E. 1994. A Systematic Approach for the Prevention and Treatment of Formation Damage Caused by Asphaltene Deposition. SPE Prod & Fac 9 (3): 157–164. SPE-23810-PA. http://dx.doi.org/10.2118/23810-PA.
Li, W. and Mamora, D. D. 2010. Drainage Mechanism of Steam With Solvent Co-injection Under Steam-Assisted Gravity Drainage (SAGD) Process. Presented at the CPS/SPE International Oil and Gas Conference and Exhibition, Beijing, 8–10 June. SPE-130802-MS. http://dx.doi.org/10.2118/130802-MS.
Li, W., Mamora, D. D., and Li, Y. 2011. Light- and Heavy-Solvent Impacts on Solvent-Aided SAGD Process: A Low-Pressure Experimental Study. J Can Pet Technol 50 (4): 19–30. SPE-133277-PA. http://dx.doi.org/10.2118/133277-PA.
Luo, P., Wang, X., and Gu, Y. 2008. Asphaltene Precipitation and Its Effects on the Vapour Extraction (VAPEX) Heavy Oil Recovery Process. Presented at the SPE International Thermal Operations and Heavy Oil Symposium, Calgary, 20–23 October. SPE-117527-MS. http://dx.doi.org/10.2118/117527-MS.
Mansoori, G. A. and Elmi, A.S. 2010. Remediation of Asphaltene and Other Heavy Organic Deposits in Oil Wells and in Pipelines. J. Reservoir & Petrol. Eng. 12–23. UDC 52.47.23. http://dx.doi.org/10.5510/OGP20100400039.
McCain, W. D. 1990. The Properties of Petroleum Fluids, second edition, p. 17. Tulsa: PennWell Books.
McColl, D., Mei, M., Millington, D. et al. 2008. Green Bitumen: The Role of Nuclear, Gasification, and CCS in Alberta’s Oil Sands. Part II—Oil Sands Cost and Production. Calgary: Canadian Energy Research Institute.
Mendoza, H. A., Finol, J. J., and Butler, R. M. 1999. SAGD, Pilot Test in Venezuela. Presented at the Latin American and Caribbean Petroleum Engineering Conference, Caracas, 21–23 April. SPE-53687-MS. http://dx.doi.org/10.2118/53687-MS.
Mohammadzadeh, O., Rezaei, N., and Chatzis, I. 2010. Pore-level Investigation of Heavy Oil and Bitumen Recovery Using Solvent-Aided Steam-Assisted Gravity Drainage (SA-SAGD) Process. Energy & Fuels 26 (12): 6327–6345. http://dx.doi.org/10.1021/ef100621s.
Mohammadzadeh, O. 2012. Experimental Studies Focused on the Pore-Scale Aspects of Heavy Oil and Bitumen Recovery Using the Steam-Assisted Gravity Drainage (SAGD) and Solvent-Aided SAGD (SA-SAGD) Recovery Processes. PhD dissertation, University of Waterloo, Waterloo, Ontario, Canada (January 2012).
Mohebati, M. H., Maini, B. B., and Hughes, R. G. 2009. Numerical Evaluation of Adding Hydrocarbon Additives to Steam in SAGD Process. Presented at the Canadian International Petroleum Conference, Calgary, 16–18 June. SPE-2009-101-MS. http://dx.doi.org/10.2118/2009-101-MS.
Mohebati, M. H., Maini, B. B., and Harding, T. G. 2012. Experimental Investigation of the Effect of Hexane on SAGD Performance at Different Operating Pressures. Presented at the SPE Heavy Oil Conference, Calgary, 12–14 June. SPE-158498-MS. http://dx.doi.org/10.2118/158498-MS.
Mojtaba, A., Barrufet, M., and Mamora, D. 2012. Effect on Non-condensable Gas on Solvent-Aided SAGD Processes. Presented at the SPE Heavy Oil Conference, Calgary, 12–14 June. SPE-146996-MS. http://dx.doi.org/10.2118/146996-MS.
Mullins, O. C., Sheu, E. Y., and Hammami, A. 2007. Asphaltenes, Heavy Oils, and Petroleomics. New York: Springer Science+Business Media, LLC.
Nasr, T. N., Kimber, K. D., and Vendrinsky, D. A. 1991. Process Enhancement in Horizontal Wells Through the Use of Vertical Drainage Channels and Hydrocarbon Additives. Presented at the Western Regional Meeting, Long Beach, California, USA, 20–22 March. SPE-21794-MS. http://dx.doi.org/10.2118/21794-MS.
Nasr, T. N. and Isaacs, E. E. 2001. Process for Enhancing Hydrocarbon Mobility Using a Steam Additive. US Patent No. 6,230,814.
Nasr, T. N., Beaulieu, G., and Golbeck, H. 2003. Novel Expanding Solvent-SAGD Process “ES-SAGD”. J Can Pet Technol 42 (1). SPE-03-01-PA. http://dx.doi.org/10.2118/03-01-PA.
Nasr, T. N. and Ayodele, O. R. 2006. New Hybrid Steam-Solvent Processes for the Recovery of Heavy Oil and Bitumen. Presented at the Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, 5–8 November. SPE-101717-MS. http://dx.doi.org/10.2118/101717-MS.
Prats, M. 1982, Thermal Recovery, Vol. 7. Richardson, Texas: SPE Monograph Series. ISBN: 978-0-89520-314-4.
Ray, J. P. and Engelhardt, F. R. 1992. Produced Water: Technological/Environmental Issues and Solutions. New York: Plenum Publishing Corp.
Scheflan, L. and Jacobs, M. B. 1953. The Handbook of Solvents. New York: D. Vas Nostrand Company, Inc.
Shkalikov, N. V., Vasil’ev, S. G., and Skirda, V. K. 2010. Peculiarities of Asphaltene Precipitation in n-Alkane–Oil Systems. Colloid J. 72 (1): 133–140. http://dx.doi.org/10.1134/S1061933X1001014X.
Shu, W. R. and Hartman, K. J. 1986. Thermal Visbreaking of Heavy Oil During Steam-Recovery Processes. SPE Res Eval & Eng 1 (5): 474–482. SPE-12783-PA. http://dx.doi.org/10.2118/12783-PA.
Smallwood, I. M. 2002. Solvent-Recovery Handbook, second edition. Boca Raton: Blackwell Science: CRC Press.
Speight, J. G. 1991. The Chemistry and Technology of Petroleum, second edition, 309–356. New York: Marcel Dekker, Inc.
Stachowiak, C., Viguie, J. R., Grolier, J. P. E. et al. 2005. Effect of n-Alkanes on Asphaltene Structuring in Petroleum Oils. Langmuir 21: 4824–4829. http://dx.doi.org/10.1021/la047126k.
Suggett, J., Gittins, S., and Youn, S. 2000. Christina Lake Thermal Project. Presented at the SPE/CIM International Conference on Horizontal Well Technology, Calgary, 6–8 November. SPE-65520-MS. http://dx.doi.org/10.2118/65520-MS.
Unal, Y., Kar, T., Mukhametshina, A. et al. 2015. The Impact of Clay Type on the Asphaltene Deposition During Bitumen Extraction With Steam-Assisted Gravity Drainage. Presented at the SPE International Symposium on Oilfield Chemistry, The Woodlands, Texas, USA, 13–15 April. SPE-173795-MS. http://dx.doi.org/10.2118/173795-MS.
Yang, G. and Butler, R. M. 1992. Effects of Reservoir Heterogeneities on Heavy Oil Recovery by Steam-Assisted Gravity Drainage. J Can Pet Technol 31 (8). SPE-92-08-03-PA. http://dx.doi.org/10.2118/92-08-03-PA.
Yang, L. 2007. Field Test of SAGD as Follow-up Process to CSS in Liaohe Oilfield of China. J Can Pet Technol 46 (4). SPE-07-04-PA. http://dx.doi.org/10.2118/07-04-PA.
Yarranton, H. W. 1997. Asphaltene Solubility and Asphaltene Stabilized Water-in-Oil Emulsions. PhD dissertation, University of Alberta, Edmonton, Alberta, Canada (1997).
Yen, T. F., Erdman, J. G., and Pollack, S. S. 1961. Investigation of the Structure of Petroleum Asphaltenes by X-Ray Diffraction. Analytical Chemistry 33 (11): 1587–1594. http://dx.doi.org/10.1021/ac60179a039.
Zhao, Y. and Wei, F. 2008. Simultaneous Removal of Asphaltenes and Water From Water-in-Bitumen Emulsion: I. Fundamental Development. Fuel-Processing Technology 89 (10): 941–948. http://dx.doi.org/10.1016/j.fuproc.2008.03.010.