ICD Well History and Future Use in a Giant Oil Field Offshore Abu Dhabi
- Chris Carpenter (JPT Technology Editor)
- Document ID
- Society of Petroleum Engineers
- Journal of Petroleum Technology
- Publication Date
- November 2015
- Document Type
- Journal Paper
- 105 - 106
- 2015. Society of Petroleum Engineers
- 1 in the last 30 days
- 105 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||Free|
|SPE Non-Member Price:||USD 15.00|
This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 171836, “ICD Well History and Future Use in Giant Offshore Field, Abu Dhabi,” by Graham Edmonstone, Curtis Kofoed, Alfred Jackson, Shardul Parihar, Adriana Alvarez, Saad Mumtaz, and Ghassan Abdouche, Zakum Development Company, and Chris Shuchart, Christian Mayer, and Andrey Troshko, ExxonMobil, prepared for the 2014 Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, 10–13 November. The paper has not been peer reviewed.
As part of a project that involves the use of four artificial islands to drill and complete more than 300 extended-reach-drilling (ERD) wells in a giant offshore oil field, several completion designs have been piloted for brownfield development. One well design incorporated the use of inflow-control devices (ICDs) and swell packers, which was the operator’s first use of such technology in a production well. The technology was installed in the pilot well to test inflow control and to manage future water production.
The giant 1200-km2 offshore oil field is located 84 km northwest off Abu Dhabi Island and consists of a layered carbonate formation that was discovered in 1963. It has still only produced a small percentage of original oil in place, with water cut (WC) less than 15%. There have been almost 500 wells drilled in the field since field discovery. Development was based on pattern producer/injector wells, with each well using a dry tree on a wellhead platform tower.
To achieve the strategic goal of increasing the production rate by approximately 40% and maintaining a plateau for up to 25 years, a brownfield development plan (UZ-750) has been generated that will use four artificial islands (Fig. 1) with large 3,000-hp land drilling rigs. The aforementioned island arrangement will allow the drilling of approximately 360 wells that will use ERD to drill horizontal laterals approximately 10,000 ft in length at measured depths up to 35,000 ft. The brownfield development plan calls for a parallel line drive for producer/injector-well pairs, to provide optimum sweep of the reservoir.
The well-completion type is determined by geologically defined areas, which are differentiated by
- High- and low-permeability regions
- Faulted and fractured regions
- Transition regions
- Current (predicted) oil-water-saturation profiles
The well-design process takes these into account along with sector modeling to determine well-completion design for the life of the well. Typically, wells in the crest of the field will have an ICD liner, in the near west of the field will have a predrilled liner, and in the west/ far northwest of the field will have a stimulation liner.
|File Size||425 KB||Number of Pages||2|