Experimental and Numerical Studies of CO2 EOR in Unconventional Reservoirs
- Adam Wilson (JPT Special Publications Editor)
- Document ID
- Society of Petroleum Engineers
- Journal of Petroleum Technology
- Publication Date
- January 2017
- Document Type
- Journal Paper
- 45 - 47
- 2016. Society of Petroleum Engineers
- 5 in the last 30 days
- 323 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||Free|
|SPE Non-Member Price:||USD 15.00|
This article, written by Special Publications Editor Adam Wilson, contains highlights of paper SPE 179634, “Experimental and Numerical Studies of CO2 EOR in Unconventional Liquid Reservoirs With Complex Fracture Networks,” by Jianlei Sun, SPE, Amy Zou, and David Schechter, SPE, Texas A&M University, prepared for the 2016 SPE Improved Oil Recovery Conference, Tulsa, 11–13 April. The paper has not been peer reviewed.
This study investigates oil-production mechanisms from the matrix into the fracture by simulating two laboratory experiments as well as several field-scale studies and evaluates the potential of using carbon dioxide (CO2) huff ’n’ puff to enhance oil recovery in unconventional liquid reservoirs (ULRs) with nanodarcy-range matrix permeability and complex natural-fracture networks. This study explores the mechanisms contributing to oil recovery with numerical modeling of experimental work and investigates the effects of various parameters on oil recovery.
CO2 injection has been recognized as one of the more important and successfully applied enhanced-oil-recovery (EOR) processes in the US since the start of the first commercial CO2-injection project in 1972. Statistics show that, out of the 153 active CO2 EOR projects worldwide, 139 of them are in the US. CO2 flooding is the only EOR method in the US that has been consistent and economical since the drop in oil prices in the 1980s. One of the main advantages of CO2 injection is that CO2 can achieve miscibility with the resident hydrocarbon when minimum miscibility pressure (MMP) is attained.
Although CO2 flooding has demonstrated the potential of increasing oil production in conventional reservoirs, if this EOR process were to be applied to ULRs, the oil-recovery mechanism could not be considered the same as that during a conventional CO2 flooding because of the differences in reservoir petrophysical properties, fluid-phase behavior, and the fundamental mass-transfer mechanisms.
In general, diffusion during gas injection has been recognized as a critical mechanism that affects the oil recovery in fractured reservoirs. If the diffusive flow in the matrix is being neglected during simulation, the calculated result will underestimate productivity.
Furthermore, complex fracture geometry has been proposed for hydraulic fracturing because of the intersection between hydraulic fractures and in-situ natural fractures. Numerous simulation and experimental studies have evaluated production performance of complex fracture networks. However, there is no extensive work regarding the potential of CO2 huff ’n’ puff in complex fracture geometries.
|File Size||2 MB||Number of Pages||3|