In this study, a state-of-the-art seismic driven 3D geological model was built and calibrated to a petrophysical and geomechanical analysis, 1D-MEM (Mechanical Earth Model), on chosen wells within the Arkoma Basin of Oklahoma. The well information utilized in this study included basic wireline logs and core analysis, including XRD (X-Ray diffraction) data. The traditional petrophysical analysis was augmented with advanced rock physics and statistical techniques to generate the necessary logs. Hydrostatic, overburden and pore pressures were calculated with a petrophysical evaluation model. The 1D-MEMs were based on the Eaton/Olson/Blanton approach with the HTI (Horizontal Transverse Anisotropy) assumption. The 1D-MEMs were calibrated to laboratory data (triaxial tests) and field observations (mud logs, wellbore failure, frac pressures). Therefore, a very good confidence was achieved on Biot's coefficient, tectonic components, anisotropy and dynamic to static conversion factors for Young's Modulus and Poisson's Ratio. Seismic inversions were performed in different time windows and merged to generate high resolution P- and S-Impedance attributes from surface down to the target interval after careful AVO compliant gather preconditioning. A density volume estimate was calibrated to well data, accounting for different geological formations, to decouple P- and S-Wave components as a 3D volume, as well as dynamic Young's modulus (E) and Poisson's ratio (PR). Dynamic E and PR were converted to static parameters using results from 1D-MEMs; and 3D models of Biot's coefficient (α) and tectonic components were built to compute 3D fracture pressure volumes calibrated to well data. The final products were seismic-driven 3D pore pressure and fracture pressure calibrated to 1D-MEMs. The correlation between measured/estimated well logs and corresponding seismic-derived pseudo logs was more than 80%, which indicates good quality of seismic inversion results and hence 3D-MEM. Also, stress barriers, anisotropy, and brittleness indices were calculated on well scale which would help to identify best zones to place hydraulic fractures. The 3D geological model will aid in identifying sweet-spots and optimizing hydraulic fractures.
Number of Pages
Looking for more?
Some of the OnePetro partner societies have developed subject- specific wikis that may help.