Production Fractionation and Efficiency Indicators from Phase Snapshots
- Brian Horsfield (GEOS4 GmbH) | Nicolaj Mahlstedt (GEOS4 GmbH) | Eric Michael (ConocoPhillips) | Neil McMahon (Kimmeridge Energy) | Mark Tobey (Encana Corporation)
- Document ID
- Unconventional Resources Technology Conference
- SPE/AAPG/SEG Unconventional Resources Technology Conference, 22-24 July, Denver, Colorado, USA
- Publication Date
- Document Type
- Conference Paper
- 2019. Unconventional Resources Technology Conference
- 1 in the last 30 days
- 53 since 2007
- Show more detail
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Petroleum produced from low permeability shales is different to the dispersed in-situ fluids from which it is derived. Whereas in-situ fluids consist of hydrocarbons, resins and asphaltenes in proportions governed by organic matter type, maturity and retention behaviour, the produced fluids are highly enriched in hydrocarbons and low polarity non-hydrocarbons, and show an enhanced GOR. Here, we study the effects of fractionation during production from Permian and Cretaceous shales using laboratory experiments, PVT-modeling and a regional PVT database. Our goal was to develop methodologies for predicting yields and compositions of produced fluids ahead of drilling.
Target wells with known fluid properties were used for calibration. Shales from neighbouring wells of slightly lower maturity were mildly matured to that of the calibration well using MSSV pyrolysis, and a PhaseSnapShot of the resultant fluid made using PVTsim.
The first example, from the late oil window Eagle Ford, demonstrates that both kerogen and bitumen are important petroleum precursors, and that in-situ compositions are largely determined by the most recently generated charge, rather than by cumulative addition during maturation. The PVT model, calibrated to the engineering report of the target well and its environs, reveals that a high proportion of the in-place C7+ fluids remain in the rock matrix relative to gas during production. The second example, taken from a gas and condensate fairway in the Permian Basin, shows that the predicted bulk composition of recently generated petroleum is facies dependent. PVT fluid calibrations have low Psat and low cricondentherms. These characteristics are reproduced by experiment, but only for those zones containing low contents of high molecular weight liquids. Any contributions to produced fluids from other zones is associated with massive retention of high molecular weight organics. The third example concerns volatile oil production from wells in the Permian Basin. The MSSV products generated by adjacent lower maturity shales exhibited phase envelopes with higher cricondentherms than that of the calibration, this being attributable to a molecular weight difference in heavy components. Adjusting the MW from 249 (measured) to 222 (produced oil PVT value) in the PVTsim model aligned the cricondentherms. This tuning step corresponds to the preferential retention of heavy polar compounds in the rock matrix during production. In a second step, 20% of the tuned MSSV-generated liquids are considered to be retained in the rock, thereby raising Psat. The result is an excellent match between the doubly tuned predicted phase envelope and that of the produced fluid. The preferential retention of polar compounds is also in line with this tuning step.
In summary, fractionation is part and parcel of production from shales. Up to 80% liquids retention relative to gas has been demonstrated. Production efficiency assessments are readily inferred from these data.
The extent to which fractionation occurs varies a lot, and has here been assessed by combining experimental rock geochemistry with PVT modeling (PhaseSnapShots), and using PVT reports on produced fluids for calibration.
|File Size||1 MB||Number of Pages||13|