Development of Scale Inhibitor for High Salinity High Iron Containing Brines
- J. Katrina Daniels (Schlumberger) | Neil Feasey (Schlumberger)
- Document ID
- Society of Petroleum Engineers
- SPE International Oilfield Scale Conference and Exhibition, 24-25 June, Virtual
- Publication Date
- Document Type
- Conference Paper
- 2020. Society of Petroleum Engineers
- 4.3.4 Scale
- high salinity brines, high iron, high TDS, synergies, scale inhibition
- 6 in the last 30 days
- 106 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
The production of high salinity brines (Total Dissolved Solids (TDS) > 250,000 ppm) during oil and gas production is known to cause severe scaling issues. When high TDS conditions are coupled with high concentrations of dissolved iron in a produced water, the challenges for controlling scale deposition increase significantly. The formation of the more common mineral scales (barium/strontium sulfate, calcium carbonate, and calcium) is expected in these produced waters and often other challenges associated with high TDS brines include the propensity for halite (sodium chloride) deposition to also occur in these environments as well. The elevated iron content present in these brines not only introduces the potential for deposition of iron-related scales but is also known to have a negative impact on scale inhibitor performance against calcium carbonate and barium sulfate scales. However, the impact on the inhibitor is different for both types of scale. The objective of this work is to evaluate the performance efficiency of polymeric and phosphonate-based scale inhibitor blends under both static and dynamic testing conditions using a synthetic brine with high TDS and varying concentrations of dissolved iron (up to 250 ppm).
The synergistic effects of combining these chemistries will be evaluated for this work. Dynamic Scale Loop (DSL) and static bottle testing will be used to determine the performance the efficiencies of the developed products.
When tested individually under a mixed scaling scenario with a high TDS and high iron containing brine, the scale inhibitors selected for this study had performance efficiencies (MED) values of 200 ppm or greater. However, when polymer/phosphonate scale inhibitor blends were evaluated a significant improvement in performance efficiency was observed.
This paper will give a detailed account of testing conducted to identify inhibitors capable of preventing the deposition of calcium carbonate and iron-related scales in challenging environments by utilizing the synergistic effects of the scale inhibitor chemistries.
|File Size||620 KB||Number of Pages||8|
LU, H.,PENKALA, J.,BROOKS, J.,HAUGEN, C.,HARBAUGH, C.,MCAFEE, C.,KALFAYAN, L. Novel laboratory and field approaches to control halite and other problematic scales in high salinity brine from the Bakken. Paper SPE 174788 presented at SPE Annual Technical Conference and Exhibition, Houston, Texas, USA, 28-30 September 2015.