Modelling Dispersed Chemical Droplets Injection in the Gas Stream for EOR Applications
- Juan D. Valencia (Universidad Nacional de Colombia, Exergy - Modeling and Analytics) | Juan M. Mejía (Universidad Nacional de Colombia) | Alonso Ocampo (GaStimTechnologies) | Alejandro Restrepo (Equion Energía)
- Document ID
- Society of Petroleum Engineers
- SPE Reservoir Characterisation and Simulation Conference and Exhibition, 17-19 September, Abu Dhabi, UAE
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- Chemical EOR, Dispersed chemicals, EOR Modelling
- 0 in the last 30 days
- 55 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
This paper address the numerical simulation of the chemically enhanced gas injection technology (ChEGas-EOR) at core and reservoir scales. In this technique, a liquid chemical solution, having engineered properties, is sprayed along with the gas stream. The mist travels through the wellbore and further introduced in the reservoir. Previous lab tests, pilot studies in light & intermediate oil reservoirs indicate that the application of CheGas-EOR allows for a reduction in operational costs, increases the chemical penetration radii and decreases the retention rate in the rock. However, the associated uncertainty is still too high to develop this process on a productive scale. In this work we use a developed phenomenological model to build a tool that assist in design and evaluation of Chemical Gas EOR operations aiming to reduce the uncertainties and optimize oil recovery.
We developed a mathematical model, based on the most important transport and surface phenomena. Non-equilibrium mass transfer between phases during the interception of the chemical solution droplets with the liquid phases. Active chemical concentration in miscible liquid phases is much lower than liquid-based chemical injection opperations. As a consequence, dissolution and adsorption rate of active chemicals with reservoir rocks are slow. The model is base on the extended black-oil model formulation coupled to local mass balance equations of active chemicals. Non-equilibrium mass transfer processes are represented with interception, dissolution and a first order kinetic sorption models.
The model was adjusted and then validated using experimental data from core-.floodint tests. Good agreement of the simulations results with experimental observations were obtained. The model can predict the relevant behavior of the disperse chemical injection in the gas phase in porous media. Also, well injections simulations at reservoir scale using the matched parameters from laboratory, reproduced pilot field results. Simulation experiments predict that the CheGasEOR process can increased substantially the oil recovery factor.
For the first time, a model for disperse chemical injection for EOR applications is developed and validated at core and reservoir scale. The simulation model allows the evaluation of this technology at different scales. Therefore, it is possible to use it to optimize operating conditions and perform sensitivity analysis for field applications.
|File Size||1 MB||Number of Pages||12|
Coats, K. H. 1995. An equation of state compositional model. Society of Petroleum Engineers Journal, 20(05), 363–376. SPE-8284-PA. DOI: 10.2118/8284-PA.
Jones, E. H., & Smith, C. C. 2005. Non-equilibrium partitioning tracer transport in porous media: 2-D physical modelling and imaging using a partitioning fluorescent dye. Water research, 39(20), 5099–5111. DOI: 10.1016/j.watres.2005.09.044.
Ocampo, A., Restrepo, A., Lopera, S. H., & Mejia, J. M. 2018. Creation of Insitu EOR Foams by the Injection of Surfactant in Gas Dispersions - Lab Confirmation and Field Application. Presented at SPE Improved Oil Recovery Conference, Tulsa, Oklahoma, USA, 14-18 April. DOI:10.2118/190219-MS
Ocampo, A., Restrepo A., Mejía, J.M, Valencia, J.D., Sanchez, H., 2019. Creating Insitu EOR Foams in Naturally Fractured Reservoirs by the Injection of Surfactant in Gas Dispersions – Lab Confirmation. Presented at EAGE 20th European Symposium on Improved Oil Recovery, Pau, Pyrénées-Atlantiques, France, 8-11 April. DOI: 10.3997/2214-4609.201900145.
Qi, Y. 1990. Fully Implicit Black-Oil Simulation on Personal Computers. Presented at Petroleum Computer Conference, Denver, 25-28 June. SPE-20365-MS. DOI: 10.2118/20365-MS.
Restrepo, A., Ocampo, A., Lopera, S. H., Diaz, M. P., Clavijo, J., & Marin, J. 2012. GaStim Concept-A Novel Technique for Well Stimulation. Part I: Understanding the Physics. Presented at SPE Latin America and Caribbean Petroleum Engineering Conference, México D.F., México, 16-12 April. SPE-152309-MS. DOI: doi.org/10.2118/152309-MS.
Restrepo, A., Ocampo, A., Lopera, S., Coronado, J. L., Sanabria, R. B., Alzate, L. G., & Hernandez, S. 2014. GaStim Concept-A Novel Technique for Well Stimulation. Part II: From Laboratory to Field Pilot Testing. Presented at SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Luisiana, USA, 13-15 February. SPE-168133-MS. DOI: 10.2118/168133-MS.
Saiers, J. E., Hornberger, G. M., & Liang, L. 1994. Numerical simulation of multiphase flow and phase partitioning in discretely fractured geologic media. Journal of contaminant hydrology, 40(2), 107–136. DOI: 10.1016/S0169-7722(99)00051-0
Slough, K. J., Sudicky, E. A., & Forsyth, P. A. 1999. First- and second- order kinetics approaches for modeling the transport of colloidal particles in porous media. Water Resources Research, 30(9), 2499–2506. DOI:10.1029/94WR01046.
Solano, H., Valencia, J.D., Mejía, J.M, Ocampo, A. 2019. A Modeling Study for Foam Generation for EOR Applications in Naturally Fractured Reservoirs Using Disperse Surfactant in the Gas Stream. Presented at EAGE 20th European Symposium on Improved Oil Recovery, Pau, Pyrénées-Atlantiques, France, 8-11 April. DOI: 10.3997/2214-4609.201900132
Valencia, J. D. 2016. Modelamiento del flujo y generación de espumas en medios porosos usando surfactante disperso en gas, MS Thesis. Universidad Nacional de Colombia, Medellin, Antioquia, Colombia. Retrieved from http://www.bdigital.unal.edu.co/55084/
Valencia J. D., Ocampo A., and Mejía J M. 2018a, Development and validation of a new model for in-situ foam generation using foamer droplets injection. Transport in Porous Media. October. https://doi.org/10.1007/s11242-018-1156-5.