Field Deployment of Fiber Optic Technology to Monitor Overburden Deformation
- Gwyn A Mali (Chevron) | Rory R Clark (Chevron) | Scott B Kenyon (Chevron) | Adam W Young (Chevron) | Devin H Paulk (Schlumberger)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 30 September - 2 October, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- Distributed Strain Sensing, Fiber Optic, DSS
- 25 in the last 30 days
- 150 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Fiber optic technology has been used in several wells at an oilfield to measure strain to monitor overburden deformation. The application of this technology involved a series of bench tests and field tests to gather some key learnings to enhance well design, well construction, and fiber optic operation.
Prior to installation of the fiber optic, a series of bench tests were conducted to evaluate the coupling of fiber with the capillary lines to determine its impact on the measurement of strain. The testing demonstrated that anchoring the fiber at the top and bottom of the capillary line was sufficient to hold the fiber in place and enabled the effective measurement of strain along the length of the well, which was proven when applied to field conditions.
To enhance well design for strain measurement, several wells had fiber optic capillary lines installed on the inside and outside of casing to investigate the potential dampening effect due to fiber being located inside a string of casing. This was used to determine the optimal casing string to install fiber optic to measure strain in the overburden. Additionally, a novel concept was utilized in the well design that involved using the fiber optic capillary clamps as borehole centralizers, which resulted in equipment and rig cost savings.
The details of the bench tests, well design, operational experience, and their associated lessons learned are presented.
|File Size||1 MB||Number of Pages||10|
Earles, D. M., Stoesz, C. W., Surveyor, N. D., Liang, A., & DeJongh, H. "Fiber Optic Strain Sensing at the Sand Face Enables Real-Time Flow Monitoring and Compaction Mitigation in Openhole Applications" SPE 147439, Annual Technical Conference and Exhibition, Denver, Colorado, October 30th-November 2nd, 2011.