Field Case Studies of Downhole Electric Heating in Two Horizontal Alberta Heavy Oil Wells
- Scott Penny (Petrospec Engineering Inc.) | John M Karanikas (Salamander Solutions Inc.) | Jonathan Barnett (Salamander Solutions Inc.) | Guy Harley (Salamander Solutions Inc.) | Chase Hartwell (Petrospec Engineering Inc.) | Trent Waddell (Petrospec Engineering Inc.)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 30 September - 2 October, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- electric, heavy oil, electric heating, heating, thermal
- 21 in the last 30 days
- 249 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Downhole electric heating has historically been unreliable or limited to short, often vertical, well sections. Technology improvements over the past several years now allow for reliable, long length, relatively high powered, downhole electric heating suitable for extended-reach horizontal wells. The application of this downhole electric heating technology in two different horizontal cold-producing heavy oil wells in Alberta is presented.
The first field case study discusses the application of electric heating in a mature, depleted field as a secondary recovery method while the second case study examines a virgin heavy oil reservoir, where cold production by artificial lift was economically challenged. The completion, installation, expected and actual results of both cases studies are compared and contrasted.
Both field deployments demonstrate the benefits and efficacy of applying downhole electric heating. In the case of the mature depleted field, electric heating resulted in a 4X-5X increase in oil rate, sustained over a period of close to two years. The energy ratio of the heating value of the incremental produced oil to the injected heat was slightly over 7.0. In the virgin heavy oil field, electric heating reduced the viscosity of the oil in the wellbore from time zero, which allows for higher rates of oil production along the complete length of the long horizontal lateral at higher, if desired, bottomhole pressures than in a cold-producing well. This degree of freedom may ultimately allow for an operating policy that suppresses excessive production of dissolved gas, thereby helping conserve reservoir energy. Early production data in this field show 4X-6X higher oil rates form the heated well than from the cold-producing benchmark well in the same reservoir.
Numerical simulation models, which include reactions that account for the foamy nature of the produced oil and the downhole injection of heat, have been developed and calibrated against field data. The models can be used to prescribe the range of optimal reservoir and fluid properties to select the most promising targets (fields, wells) for downhole electric heating as a production optimization method, which is crucially important in the current low oil price scenario. The same models can also be used during the execution of the project to explore optimal operating conditions and operating procedures.
Downhole electric heating in long horizontal wells is now a commercially available technology that can be reliably applied as a production optimization recovery scheme in heavy oil reservoirs. Understanding the optimum reservoir conditions where the application of downhole electric heating maximizes economic benefits will assist in identifying areas of opportunity to meaningfully increase reserves and production in heavy oil reservoirs in Alberta as well as around the world.
|File Size||1 MB||Number of Pages||19|
Bottazzi, F., Repetto, C., Tita, E. and Maugeri, G., 2013, "Downhole Electrical Heating for Heavy Oil Enhanced Recovery: a Successful Application in Offshore Congo", presented at the International Petroleum Technology Conference, Beijing 26-28 March, IPTC-16858-Abstract. https://doi.org/10.2523/IPTC-16858-Abstract
CMG, STARS, Thermal & Advanced Processes Reservoir Simulator, 2018. http://www.cmg.ca
Duval, K., Gutierrez, D., Petrakos, D., Ollier, P., and Johannson, D., 2015, "Successful Application of Hot-Water Circulation in the Pelican Lake Field: Results and Analyses of the E29 Hot-Water-Injection Pilot", J. Can. Pet. Technol 54 (06): SPE-174491-PA https://doi.org/10.2118/174491-PA
Mao, D., Xie, X., Jones, R. M., Harvey, A. and Karanikas J. M., 2017, "A Simple Approach for Quantifying Accelerated Production Through Heating Producer Wells", SPE Journal 22 (01): 316–26, SPE-181757-PA https://doi.org/10.2118/181757-PA
Pizarro, J. O. S. and Trevisan, O. V., 1990, "Electrical Heating of Oil Reservoirs: Numerical Simulation and Field Test Results", J. Pet. Technol 42 (10): 1320–1326. SPE-19685-PA https://doi.org/10.2118/19685-PA
Rodriguez, R., Bashbush, J. L. and Rincon, 2008, A. "Feasibility of using electrical downhole heaters in Faja heavy-oil reservoirs", SPE-117682-MS https://doi.org/10.2118/117682-MS
Sandberg, C., Hale, A., Kovscek, A. R., 2013, "History and Applications of Resistance Electrical Heaters in Downhole Oil Field Applications", SPE-165323-MS https://doi.org/10.2118/165323-MS