A Robot for Removing Hydrate and Paraffin Plugs in Offshore Flexible Lines – Development and Experimental Trials
- Hugo Santos (Petrobras) | Eduardo Perondi (UFRGS) | André Wentz (Senai-SC) | Anselmo Silva (Senai-SC) | Dante Barone (UFRGS) | Eduardo Basso (UFRGS) | Ney Reis (Petrobras) | Maurício Galassi (Petrobras) | Hardy Pinto (Petrobras) | Bruno Castro (Petrobras) | André Ferreira (Petrobras) | Lincoln Ferreira (Petrobras) | Igor Krettli (Petrobras)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 30 September - 2 October, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2019. Society of Petroleum Engineers
- Robot, Hydrate, Flow Assurance, Paraffin, Offshore pipeline
- 10 in the last 30 days
- 186 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Methane Hydrates and Paraffin Plugs in flexible lines are concerns in offshore production. They may stop wells for months, causing high financial losses. Sometimes, operators use depressurization techniques for hydrate removal. Other strategy is using coiled tubing or a similar unit in order to perform local heating or solvent injection. However, frequently these strategies are not successful. In those cases, a rig may perform the operation or the line may be lost.
This project developed a robotic system in order to perform a controlled local heating and remove obstructions. The robotic system developed is able to access the line from the production platform. It uses a self-locking system in order to exert high traction forces. An umbilical with neutral buoyancy and low friction coefficient allows significant drag reduction. It allows moving upwards and in pipes with a large number of curves. Coiled tubing and similar units cannot do that. Carbon fiber vessels and compact circuits give flexibility to move inside 4-inch flexible pipes. A novel theoretical model allows the cable traction calculation using an evolution of the Euler-Eytelwein equation.
Experimental tests validated this model using curved pipes, both empty and filled with a fluid and using different loads. Experimental tests also validated the external layer traction resistance. Furthermore, the carbon fiber vessels were pressure tested, indicating a collapse resistance of more than 550 bar (8.000 psi). In addition, exhaustive tests of the onboard electronics and of the surface control system guarantee the communication reliability.
Additionally, the 25 kN (5.6 kip) traction system was modeled theoretically considering the self-locking system, the contact with the wall and a diameter range. Four prototypes allowed to: a) compare hydraulic and electric drive systems, b) validate the self-locking mechanism up to its limit, c) analyze the hydraulic system for leg opening and translation and d) prove the traction capacity. Finally, a theoretical model for the local heating system was developed. The system experimental validation on a cooled environment demonstrated its capacity of increasing temperature. Furthermore, it allows the obstruction removal in a controlled manner, avoiding damage to the polymeric layer of the flexible line.
|File Size||2 MB||Number of Pages||19|
Basso, E., Perondi, E., Santos, H., Barone, D., Silva, A., Wentz, A., Mendel, H. (2019). Surpassing the Challenges of a Robotic Traction System for Movement inside Long Flexible Obstructed Pipes. Society of Petroleum Engineers. doi:10.2118/195925-MS
Bukkaraju, S. K., Osorio, N. F., Annadorai, K. M., Garduño, J. L., & Golden, N. K. (2016). Practical Guidelines for the Diagnosis and Remediation of Pipeline Blockages. Offshore Technology Conference. doi:10.4043/27001-MS
Cochran, S. (2003). Hydrate Control and Remediation Best Practices in Deepwater Oil Developments. Offshore Technology Conference. doi:10.4043/15255-MS
Manfield, P., Stone, B., Kwan, T., Zimmerman, E., & Devlin, P. (2007). Wax-On, Wax-Off: Understanding and Mitigating Wax Deposition in a Deepwater Subsea Gas/Condensate Flowline. Offshore Technology Conference. doi:10.4043/18834-MS
Menezes, E. A. W., Geiger, F. P., Basso, E. D., Perondi, E. A., Wildner, F. D., Laranja, R. A. C., Santos, H. F. L. (2017). Analytical and Experimental Analysis of Friction Forces inside Curved Pipes. Offshore Technology Conference. doi:10.4043/28157-MS
Menezes, E., Geiger, F., Perondi, E. Fernandez, J., Santos, H. (2019) Analytical and Experimental Analysis of Static Friction Forces of Moving Cables Inside Curved Pipes. Journal of Offshore Mechanics and Arctic Engineering. doi: 10.1115/1.4042945
Minami, K., Kurban, A. P. A., Khalil, C. N., & Kuchpil, C. (1999). Ensuring Flow and Production in Deepwater Environments. Offshore Technology Conference. doi:10.4043/11035-MS.
Sum, A. K. (2013). Prevention, Management, and Remediation Approaches for Gas Hydrates in the Flow Assurance of Oil/Gas Flowlines. Offshore Technology Conference. doi:10.4043/24396-MS
Yaari, M. (2011). Paraffin Wax Deposition: Mitigation and Removal Techniques. Society of Petroleum Engineers. doi:10.2118/155412-MS