Effective Zonal Isolation in Horizontal Wells: Mitigating Negative Impact of Mud Channels
- Petr Kolchanov (Schlumberger) | Dominic Perroni (Schlumberger) | Anatoly Medvedev (Schlumberger) | Yan Gao (Schlumberger) | Randy Tercero (Schlumberger) | Larry Todd (Schlumberger) | Bernhard Lungwitz (Schlumberger) | Kenneth Mike Cowan (Occidental Petroleum) | William Turner (Occidental Petroleum)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 24-26 September, Dallas, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2018. Society of Petroleum Engineers
- 2.2 Installation and Completion Operations, 4.1 Processing Systems and Design, 4 Facilities Design, Construction and Operation, 7.2 Risk Management and Decision-Making, 7.2.1 Risk, Uncertainty and Risk Assessment, 7 Management and Information, 2 Well completion, 2.10 Well Integrity, 2.10.3 Zonal Isolation, 0.2 Wellbore Design, 4.1.2 Separation and Treating
- Mud removal, channels, fracturing, horizontal, cementing
- 20 in the last 30 days
- 388 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 8.50|
|SPE Non-Member Price:||USD 25.00|
Currently, hydraulic isolation of wells drilled with nonaqueous fluids (NAFs) relies heavily on the elimination of mud from the annuli before the placement of cement. Failure to expel all NAFs will result in residual fluid channels that will compromise well integrity and can even serve as nonproductive communication pathways during subsequent stimulation treatments. To mitigate this risk, an interactive cementing system is presented that is designed to reduce conductivity of the residual mud channels.
Although mud removal remains an integral part of the cementing process, this new cement formulation was developed to improve zonal isolation in the case of poor mud removal. The unique cement system reacts with the hydrocarbons present in NAFs, leading to a reduction of channel permeability and mobility. This significantly improves the likelihood of hydraulic isolation. Specialized testing protocols were developed to enable the demonstration of the capabilities of this new system. In addition, API testing methods and analytical techniques were used to optimize the slurry.
The development of the new cement system focused on the optimization of the active component concentration to give a favorable interaction with NAF, and at the same time, minimize the effect on cement rheology and mechanical properties. Procedures developed in-house demonstrated that the new system effectively reduces hydraulic conductivity of microannuli as well as channels up to several tenths of inches in size. Zonal isolation laboratory experiments were extrapolated to predict whether the modified channels can withstand the range of differential pressures typically seen between neighboring fracturing stages. This is the most critical operation that the cement sheath would be subject to.
Field tests are on-going at the time of writing this manuscript, and the preliminary results will be presented and discussed in this paper.
|File Size||1 MB||Number of Pages||12|
Ariyanto, P., Najwani, M. A, Najwani, Y.. 2015. Achieving Cementing Improvement in Horizontal Tight Gas Field Development. Presented at the SPE Middle East Unconventional Resources Conference and Exhibition, Muscat, Oman, 26-28 January. SPE-172937-MS. https://doi.org/10.2118/172937-MS.
Malhotra, S., Merrifield, T., Lynch, C. Y.. 2015. Coiled Tubing Horizontal Well Fracturing in the Low Young's Modulus, Low Permeability Belridge Diatomite: Challenges Faced and Lessons Learned. Presented at the SPE Hydraulic Fracturing Technology Conference, The Woodlands, Texas, USA, 3_5 February. SPE-173365-MS. https://doi.org/10.2118/173365-MS.
McFall, R., Mullen, K., Baihly, J.. 2017. Refracturing in the Eagle Ford Shale: One Operator's Quest to Identify and Rank Candidates, Minimize Well Interference, and Understand Variability of Results. Presented at the SPE/AAPG/SEG Unconventional Resources Technology Conference, Austin, Texas, USA, 24-26 July. URTEC-2691375-MS. https://doi.org/10.15530/2691375-MS.
Waters, G. and Weng, X. 2016. The Impact of Geomechanics and Perforations on Hydraulic Fracture Initiation and Complexity in Horizontal Well Completions. Presented at the SPE Annual Technical Conference and Exhibition, Dubai, UAE, 26–28 September. SPE-181684-MS. https://doi.org/10.2118/181684-MS.