Water Source Identification and Inflow Profile Determination in Horizontal Wells after Multistage Hydraulic Fracturing Using Passive Location Method and Temperature Modelling
- Irina Aslanyan (TGT Oilfield Services) | Roza Minakhmetova (TGT Oilfield Services) | Sergey Salmin (TGT Oilfield Services) | Alexander Trusov (TGT Oilfield Services) | Azat Lutfullin (PJSC Tatneft) | Bulat Ganiev (PJSC Tatneft) | Rishat Khabipov (PJSC Tatneft) | Azat Khabibrahmanov (PJSC Tatneft) | Aidar Yakupov (PJSC Tatneft) | Pavel Morozov (PJSC Tatneft)
- Document ID
- Society of Petroleum Engineers
- SPE Russian Petroleum Technology Conference, 15-17 October, Moscow, Russia
- Publication Date
- Document Type
- Conference Paper
- 2018. Society of Petroleum Engineers
- 3 Production and Well Operations, 5.6 Formation Evaluation & Management, 7 Management and Information, 1.6 Drilling Operations, 2.4 Hydraulic Fracturing, 3 Production and Well Operations, 2 Well completion, 7.2 Risk Management and Decision-Making, 7.2.1 Risk, Uncertainty and Risk Assessment, 1.6.6 Directional Drilling, 5 Reservoir Desciption & Dynamics, 5.6.1 Open hole/cased hole log analysis
- 1 in the last 30 days
- 63 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
One of the most effective oil production stimulation techniques in low permeability and heterogeneous reservoirs is multistage hydraulic fracturing. The multistage hydraulic fracturing technique has multiple engineering solutions dependent on the specifics of a particular target and its performance parameters. Hydraulic fracturing in a horizontal well involves a risk of communications with over- and underlying water-bearing formations via the fractures developing as a result of the hydraulic fracturing job. As a consequence, water cut in the well increases, negatively affecting the overall well performance. Another cause of a higher water cut could be a leak in the downhole completion.
To identify water sources in horizontal wells, modern logging techniques are applied. To enhance the informative value of a standard logging suite focused on inflow profile evaluation and integrity assessment in a multistage hydraulic fracturing well, SNL locator and acoustic flowmeter were added.
This paper discusses some cases of locating water sources in horizontal producers using new well logging and interpretation techniques. The information obtained as a result of well investigation was used to detect the water source and assess the multistage hydraulic fracturing job effectiveness. It was also recommended to perform workovers for the purpose of shutting off the water-producing zones.
|File Size||1 MB||Number of Pages||12|
Maslennikova, Y. S., Bochkarev, V. V., Savinkov, A. V., Davydov, D. A. 2012. Spectral Noise Logging Data Processing Technology. Presented at the SPE Russian Oil and Gas Exploration and Production Technical Conference and Exhibition, 16-18 October, Moscow, Russia. doi:10.2118/162081-MS. https://www.onepetro.org/conference-paper/SPE-162081-MS
Ghalem, S., Serry, A. M., Al-felasi Aliet al. 2012. Innovative Logging Tool Using Noise Log and High Precision Temperature Help to Diagnoses Complex Problems. Presented at the Abu Dhabi International Petroleum Conference and Exhibition, 11-14 November, Abu Dhabi, UAE. doi:10.2118/161712-MS.
McKinley, R. M., Bower, F. M., Rumble, R. C. 1973. The Structure and Interpretation of Noise from Flow Behind Cemented Casing. Society of Petroleum Engineers. doi:10.2118/3999-PA.
Aslanyan, A., Wilson, M., Al Shammakhy, A., Aristov, S. 2013. Evaluating Injection Performance with High-precision Temperature Logging and Numerical Temperature Modelling. Presented at the SPE Reservoir Characterization and Simulation Conference and Exhibition, 16-18 September, Abu Dhabi, UAE. doi:10.2118/166007-MS.
A.A. Lutfullin(Novatek-Tarkosaleneftegaz LLC), A.R. Abdrahimov(Novatek JSC), I.N. Shigapov, I. Yu. Aslanyan, A.M. Aslanyan, R.K. Kuzyutin(TGT Oilfield Services). 2014. Identification of Behind-Casing Flowing Reservoir Intervals by the Integrated High-Precision Temperature and Spectral Noise Logging Techniques. Presented at the SPE Russian Oil and Gas Exploration & Production Technical Conference and Exhibition, 14-16 October, Moscow, Russia https://doi.org/10.2118/171251- RU
A. Aslanyan, I. Aslanyan, A. Salamatin, A. Karuzin, Y. Fesinaet al. 2014. Numerical Temperature Modelling for Quantitative Analysis of Low-Compressible Fluid Production. SPE 172090 presented at the Abu-Dhabi International Petroleum Exhibition and Conference held in Abu-Dhabi, UAE, 10-13 November. https://doi.org/10.2118/172090-MS
I. Aslanyan, R. Minakhmetova, A. Trusov, 2018. Multistage Hydrofracturing Efficiency Analysis and Horizontal Well Inflow Profiling Using Spectral Noise Logging Technique. SPE 191562 presented at the SPE Russian Oil and Gas Exploration and Production Technical Conference and Exhibition, 15-17 October.