Improving ESP Production Through Compression
- Paul Munding (Flogistix, LP) | John Hudson (Flogistix, LP)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 24-26 September, Dallas, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2018. Society of Petroleum Engineers
- 4.1 Processing Systems and Design, 3.1.6 Gas Lift, 3.1 Artificial Lift Systems, 4 Facilities Design, Construction and Operation, 4.1.6 Compressors, Engines and Turbines, 3 Production and Well Operations, 2.1.3 Completion Equipment
- Pump Efficiency, ESP, Compressor, Gas Handling, Production Optimization
- 6 in the last 30 days
- 244 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 8.50|
|SPE Non-Member Price:||USD 25.00|
ESPs are a main type of artificial lift being used to unload current horizontal unconventional wells. Due to their high cost and high failure rate an operator must implement them in the most efficient manner possible. This paper addresses a way to create a solution to make ESPs more efficient by using compression at surface.
Current ways of handling gas through ESPs are insufficient utilizing variable speed drives (VSDs). Additional gas handling equipment installed in ESPs have also encountered mixed results as designs continue to be tinkered to improve gas handling. One area that has not been researched extensively is utilizing compression to drawdown the casing annulus of a well on ESP. A preferential path of less static head pressure allows the gas to be drawn up the annulus rather than handled through the pump. Thereby alleviating gas handling problems in the ESP and raising the FL over the pump.
The paper presents two case studies in Oklahoma involving ESP compression assistance up the annulus: one is a case study of an unconventional well of the Mississippi Lime with a low FL and moderate gas production, the second is an unconventional well in the Meramec formation with large amounts of gas production that was increased with the assistance of a compressor to the ESP. Data was collected over a six-week period and ESP performance is compared before and after the surface compressor installation for case 1. In case 2, well performance is compared for 3 different artificial lift setups: gas lift, ESP, and compression assisted ESP over a 3-month period.
Both case studies show benefits for utilizing surface compression with an ESP. The biggest benefits were found to be increased production and reduced operating cost by extending ESP longevity.
|File Size||1 MB||Number of Pages||15|
Bassett, L. 2010. Case History Using ESP's to De-Water Horizontal Wells. Presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, Brisbane, Australia, 18-20 October. SPE-133464. https://doi.org/10.2118/133464-MS.
Kadio-Morokro, B., Curay, F., Fernandez, J., and Salazar, V. 2017. Extending ESP Run Life in Gassy Wells Application. Presented at the SPE Electric Submersible Pump Symposium, The Woodlands, TX, 24-28 April. SPE-185272-MS. https://doi.org/10.2118/185272-MS.
Krasnov, V.A., Litvinenko K.V., and Khabibullin, R.A. 2014. An Approach to Account ESP Head Degradation in Gassy Wells for ESP Frequency Optimization. Presented at the SPE Artificial Lift Conference & Exhibition-North America, Houston, TX, 6-8 October. SPE-171338-MS. https://doi.org/10.2118/171338-MS.
Lastra, R. 2016. The Quest for the Ultrareliable ESP. Presented at the SPE Middle East Artificial Lift Conference and Exhibition, Manama, Kingdom of Bahrain, 30 November – 1 December. SPE-184169-MS. https://doi.org/10.2118/184169-MS.
Lea, J.F. and Bearden, J.L. 1980. Effect of Gaseous Fluids on Submersible Pump Performance. Annual Technical Conference and Exhibition, Dallas, TX, 21-24 September. SPE-9218. https://doi.org/10.2118/9218-PA.
McCoy, J.N., Podio, A.L., and Huddleston K.L. 1985. Acoustic Producing Bottomhole Pressures. Annual Technical Conference and Exhibition, Las Vegas, NV, 22-25 September. SPE-14254. https://doi.org/10.2118/14254-PA.