Determination of Particle Shape and Size Distribution from Micro X-Ray CT Scans for Petrophysical Evaluation and Sand Control Design
- K. Ghasemi (Azad University) | M. Mahmoudi (RGL) | M. Roostaei (RGL) | V. Fattahpour (RGL) | M. Soroush (University of Trinidad and Tobago) | A. Nouri (University of Alberta)
- Document ID
- Society of Petroleum Engineers
- SPE Trinidad and Tobago Section Energy Resources Conference, 25-26 June, Port of Spain, Trinidad and Tobago
- Publication Date
- Document Type
- Conference Paper
- 2018. Society of Petroleum Engineers
- 0.2 Wellbore Design, 2.4 Sand Control, 2 Well completion, 2.2 Installation and Completion Operations, 1.2.3 Rock properties
- Permeability, Micro X-Ray CT scan, Porosity, Maximal Ball Procedure, Particle Shape
- 1 in the last 30 days
- 137 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Particle size, shape and mineralogy are considered as primary characteristics of sand and sandstone. Several techniques have been developed for the particle size and shape analysis of unconsolidated sands. However, few of these techniques can be used for sandstones. Most particle size measurement techniques provide a spherical equivalent of the particle size and neglect the particle shape. Although several techniques have been developed for the particle size and shape analysis of the unconsolidated sands, these techniques could not be used for the size and shape variation analysis of consolidated or semi-consolidated sandstone.
Recently, X-ray micro CT scanning technique has been used for the evaluation of petrophysical properties of sandstones. This paper presents a workflow for the measurement of particle size and shape of sandstones. This research utilized X-ray micro CT scans for 2-dimensional particle shape measurements including Sphericity, Convexity, Aspect Ratio and Feret diameters. The methodology presented in this paper is the first step toward assessing the particle shape and size variation of sandstones for use in such applications as sand control design.
Image-J, an Open-source software, was used to process and filter the X-ray raw images. A new tool was developed to measure the shape factors (i.e. Sphericity, Aspect Ratio and Convexity) and size variations. A series of images from different sandstones were analyzed and compared to their lab measurements. The image calculated porosity and permeability showed some degree of deviation from the lab measured porosity and permeabilities.
This paper presents a new workflow to measure the particle size and shape for the sand control design in sandstone reservoirs. With a larger database it is possible to develop a correlation to calculate rock properties from image size analysis technique and correct them for the shape variation. The next step will be to measure the 3D size and shape from the image analysis and compare to the shape and size analysis from dynamic image analysis.
|File Size||3 MB||Number of Pages||12|
Rasband, W.S. (1997-2018) Image J, U. S. National Institutes of Health, Bethesda, Maryland, USA, https://imagej.nih.gov/ij/ (Last accessed March 31, 2018).
Roostaei, M., Nouri, A., Fattahpour, V.. 2018. Sand Control Design through Assessment of Mathematical Models Representing Particle Size Distribution of Reservoir Sands. Presented at SPE International Conference and Exhibition on Formation Damage Control, 7-9 February, Lafayette, Louisiana, USA, SPE-189528-MS.