Evaluation and Optimisation of Smart Water Injection for Fractured Reservoir
- M. I. Akbar (Imperial College London) | N. Agenet (TOTAL) | A. M. Kamp (TOTAL) | O. R. Gosselin (Imperial College London)
- Document ID
- Society of Petroleum Engineers
- SPE Europec featured at 80th EAGE Conference and Exhibition, 11-14 June, Copenhagen, Denmark
- Publication Date
- Document Type
- Conference Paper
- 2018. Society of Petroleum Engineers
- 5.4 Improved and Enhanced Recovery, 5.5.3 Scaling Methods, 5.4.1 Waterflooding, 5.5 Reservoir Simulation, 4.3.4 Scale, 5 Reservoir Desciption & Dynamics, 5.4 Improved and Enhanced Recovery
- fractured reservoir, reservoir simulation, low salt, smart water
- 0 in the last 30 days
- 153 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Smart water injection or low-salinity water flooding is an enhanced oil recovery technique for fractured reservoirs. The mechanism of low-salinity water flooding is performed by altering the wettability of rock towards water-wetness.
This study presents an evaluation of low-salinity water flooding based on a brown field fractured reservoir properties by using explicit simulation of spontaneous imbibition at a fine scale (single and multiple matrix block level), and assessing the validity of dual-medium simulation models, which will be further used to perform modelling at the full field scale.
Some reservoir parameters were varied within plausible range to quantify their impact on the recovery mechanism. To mitigate the biases of dual-medium models, upscaling and pseudoisation techniques were applied to match the behaviour of explicit fine-scale single-porosity model. A particular emphasis on the modelling of salt diffusion is made through one-dimension model.
It was found that, whereas pressure diffusion is rather well represented by the usual matrix-fracture exchange coefficient formalism, the underlying assumption of pseudo-steady state seems to be inappropriate for salt diffusion phenomenon.
When salt diffusion is the main driver for low salinity water imbibition, for example at the early times of a switch from high salinity to low salinity, it appears that the salt diffusion process occurs in a transient regime that cannot be properly represented by the pseudo-steady state regime assumption.
This has an impact on the modelled incremental recovery and consequently on the low salinity flooding efficiency evaluation.
|File Size||1 MB||Number of Pages||19|
Lu, H., Di Donato, G. and Blunt, M.J. 2006. General Transfer Functions for Multiphase Flow. DOI: 10.2118/102542-MS.
Pruess, K. 1992. Brief guide to the MINC-method for modeling flow and transport in fractured media. United States: N. p., Web. doi:10.2172/10179280.