Extra Heavy Oil Production Using Dilution: Viscosity Measurement and Modeling

Authors
H. Alboudwarej (Chevron ETC) | J. Mohan (Chevron Corporation) | F. Gozalpour (Chevron ETC) | S. S. Jarvis (Chevron Corporation-Retired)
DOI
https://doi.org/10.2118/190084-MS
Document ID
SPE-190084-MS
Publisher
Society of Petroleum Engineers
Source
SPE Western Regional Meeting, 22-26 April, Garden Grove, California, USA
Publication Date
2018
Document Type
Conference Paper
Language
English
ISBN
978-1-61399-599-0
Copyright
2018. Society of Petroleum Engineers
Disciplines
5 Reservoir Desciption & Dynamics, 4.3.3 Aspaltenes, 5.4 Improved and Enhanced Recovery, 5.4.10 Microbial Methods, 5.4.6 Thermal Methods
Keywords
Heavy Oil, Diluent, Viscosity, Mixing Rule
Downloads
1 in the last 30 days
148 since 2007
Show more detail
View rights & permissions
SPE Member Price: USD 5.00
SPE Non-Member Price: USD 28.00
Abstract

A viable method to produce a deep extra heavy oil reservoir with an in-situ viscosity in excess of 1000 cp is viscosity reduction with dilution, and where steam flooding may be an unlikely option. The objective of this study is to determine viscosity reduction of an extra heavy oil sample as a function of pressure, temperature and composition, where composition refers to addition of different amounts of diluents. Results of this study and modeling of the mixture viscosity can be used to guide future operational decision making to develop large heavy oil resources, where steam flood is not economical.

An extensive experimental test matrix was carried out in this study. A high-pressure capillary tube viscometer was used for viscosity measurements, which is the preferred measurement method for extra heavy oil systems. Potential compatibility issues such as wax and asphaltene formation due to changes in composition and/or temperature were considered during the design and execution of experimental work. In excess of 90 viscosity data points were measured for mixtures of an extra heavy oil sample and two diluents (a diesel sample and a light crude oil sample). The system pressure varied up to 4000 psia, the temperature varied in the range of 80-200 °F, and amount of diluents changed up to 40% by volume. Data QC protocols were implemented and quality of measured viscosities were assessed. Some measurements were repeated to ensure high quality of generated viscosity data.

Three to four orders of magnitude of viscosity reduction were observed with changes in pressure, temperature and composition. On average and for studied fluid systems, every 50 °F change, or 20% increase by volume in diluent concentration, reduced the mixture viscosity by almost an order of magnitude. The impact was less significant at higher temperatures and concentration of diluents. Viscosity data were used to develop specific mixture viscosity correlations for the systems of interest, representing measured viscosities with an average absolute deviation (AAD) of less than 3%. Furthermore, a large number of viscosity mixing rules were evaluated to represent measured viscosity data in this study. Some mixing rules predicted the viscosity data with 15-20 % deviation and an average standard deviation of 14%. A new mixing rule (Modified Ratcliff & Khan) was developed with an AAD of 11% and a standard deviation of 5% (at least 50% improvement in the performance).

Currently, universal viscosity mixing rules are not available, particularly for extra heavy oil and diluent mixtures. The novelty of this study is to provide a high-quality database of heavy oil and diluent viscosity data, together with the development of a new general mixing rule applicable to the type of oils and diluents investigated in this study.

File Size  1 MBNumber of Pages   19

Arrhenius, S.A., 1887, Uber die Dissociation der in Wasser gelosten Stoffe, Phys Chem, 1, pp. 631–648.

Baird, C.T., 1989, Guide to Petroleum Product Blending, HPI consultants, Flagstaff, AZ, Chapter 8.

Barrufet, M., Setiadarma, A., 2003, Reliable heavy oil–solvent viscosity mixing rules for viscosities up to 450 K, oil–solvent viscosity ratios up to 4 [1] 105, and any solvent proportion, Fluid Phase Equilibria, 213, pp. 65–79.

Bergman, D., and Sutton, R., 2009, A Consistent and Accurate Dead-Oil Viscosity Method, SPE Reservoir Evaluation and & Engineering, December, pp. 815–840, SPE# 110194.

Bingham, E.C., 1914, The viscosity of binary mixtures. J Phys Chem., 18, pp. 157–65.

Chirinos, M.L., Gouzalez, J., and Layrisse, I., 1983, Rheological Properties of Crude Oils from The Orinoco Oil Belt and the Mixtures with Diluents; Revista Tecnica Intevep, 3(2), pp. 103–115.

Cragoe, C.S., 1933, Changes in the viscosity of liquids with temperature, pressure and composition. Proc World Pet Cong Lond, 2, pp. 529–541.

Centeno, G., Sánchez-Reyna, G., Ancheyta, J., Muñoz, J.A.D., Cardona, N., 2011, Testing various mixing rules for calculation of viscosity of petroleum blends, Fuel, 90, pp. 3561–3570.

Jeffries-Harris, M.J. and Coppel, C.P., 1969, Solvent Stimulation in Low Gravity Oil Reservoirs, JPT, 21(02), pp. 167–175.

Kendall, J., and Monroe, K., 1917, The viscosity of liquids II. The viscosity-composition curve for ideal liquid mixtures. Am Chem J., 9, pp.1787–1802.

Lederer, E.L., 1933, Viscosity of mixtures with and without diluents, Proc World Pet Cong Lond, 2, pp. 526–528.

Maples, R.E., 2000, Petroleum Refinery Process Economics, 2nd Edition, Pennwell Books, ISBN 0-87814-779-9

Maxwell, J.B., 1950, Data Book on Hydrocarbons, Ninth Printing, D. Van Nostrand Comnpanry, Inc, Princton, NJ.

McAllister, R.A., 1960, The viscosity of liquid mixtures, AIChE J., 6, pp. 427–431.

Miadonye, A., Latour, N., Puttagunta, V.R., 2000, A correlation for viscosity and solvent mass fraction of bitumen-diluent mixtures, Pet. Sci. Tech., 18, pp. 1–14.

Moreau, B.L., 1965, The Pipeline Transportation of Heavy Oils, JCPT, 4(4), pp. 252–256.

Parakash, S., 2003, Refining Processes Handbook, Elsevier Publishing, 327–328.

Ratcliff G.A., and Khan M.A., 1971, Prediction of the viscosities of liquid mixtures by a group solution model. Can. J. Chem. Eng., 49, pp. 125–129.

Reid R.C., Prausnitz J.M., Sherwood T.K., 1977, The properties of gases and liquids, 3rd ed. New York: McGraw Hill.

Shu, W.R., 1984, A viscosity correlation for mixtures of heavy oil, bitumen, and petroleum fractions, SPE J., June, pp. 277–282.

Wallace, D. and Henry, D., 1987, A Correlation for Correcting the Viscosity of Solvent-Extracted Bitumen to a Solvent-Free Basis; AOSTRA Journal of Research, Vol. 3, No. 4, pp. 239–248.

Walther, C., 1931, The evaluation of viscosity data. Erdöl Teer, 7, pp. 382.

Zhao, H., Memon, A., Gao, J., Taylor SD, Sieben, D., Ratulowski, J., Alboudwarej, H., Pappas, J., Creek, J., 2016, Heavy Oil Viscosity Measurements: Best Practices and Guidelines, Energy Fuels, 30 (7), pp. 5277–5290.

Other Resources

Looking for more? 

Some of the OnePetro partner societies have developed subject- specific wikis that may help.


  

PetroWiki was initially created from the seven volume  Petroleum Engineering Handbook (PEH) published by the  Society of Petroleum Engineers (SPE).







The SEG Wiki is a useful collection of information for working geophysicists, educators, and students in the field of geophysics. The initial content has been derived from : Robert E. Sheriff's Encyclopedic Dictionary of Applied Geophysics, fourth edition.