Breaking the Performance/Cost Paradigm in Drill Pipe Connections in Extended Reach Drilling
- Guillaume Plessis (NOV) | Andrei Muradov (NOV) | Chuck Wright (NOV) | Dan Morgan (NOV) | Jeremy Dugas (Quail Tools) | Brennan White (Quail Tools) | Dallas Daley (Concho Resources)
- Document ID
- Society of Petroleum Engineers
- IADC/SPE Drilling Conference and Exhibition, 6-8 March, Fort Worth, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2018. IADC/SPE Drilling Conference and Exhibition
- 1.6.6 Directional Drilling, 1.10.4 Onshore Drilling Units, 1.6 Drilling Operations, 1.10 Drilling Equipment
- case history, double shouldered connection, drill pipe, New technology, cost of ownership
- 6 in the last 30 days
- 204 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Various generations of double-shouldered drill pipe connections have been developed in the past 30 to 40 years with performance as a primary driver. The objective was to bring improvements in torque and hydraulics to satisfy drillers' needs. The record extended reach drilling (ERD) wells could not have been delivered without these technological advancements. The driver for these developments was solely on improved performances, with limited focus on cost, as these technologies were so enabling that the associated costs were deemed acceptable.
When these same connections started to be used on land rigs to deliver wells in a factory drilling fashion, where cost control is of higher importance, the cost of maintaining these premium connections started to become more apparent. It, therefore, became obvious that a different approach was needed to meet the combined need for performance, as well as a lower cost of ownership post acquisition.
A comprehensive two-year research and development (R&D) program was carried out to evaluate various design options. After the research was conducted, a design was chosen that allows better control of stress inside the connection. This allows users to benefit from other design features besides the torque and hydraulics of a streamlined connection. The R&D program included numeric simulation and mechanical lab testing. More specific elements of the design allowed more tolerance related to field damage of the connection, less material loss on repairs, and more importantly, a ruggedness so that the connection can remain in the field longer rather than needing to be repaired so often.
The final stage of qualification was a field trial at the manufacturer's test rig facility. A post field trial inspection confirmed the improved serviceability and ruggedness, qualifying the connection for commercial release.
The 4th generation double-shouldered connection was first put to task in the Permian basin. A rental string was dispatched to a land rig and used to drill the longest and fastest lateral in the area. The tapered 5½ in. by 5 in. drill pipe string, which comes with tool joints of a similar size (this of 5 in. drill pipe), drilled the well and saved two days off the estimated drilling plan. Subsequently, more strings have been deployed, and more data shall be gathered in this paper to demonstrate the low repair rate.
A new approach has been used to design a connection that performs at high torque levels but also demonstrates improved serviceability and a ruggedness approaching that of an API rotary shoulder connection.
|File Size||1 MB||Number of Pages||15|
Chandler R. B, Muradov A., Jellison M. J.. 2007. Drill Faster, Deeper and Further with Ultra-High Torque, Third Generation Double-Shoulder Connections. SPE/IADC Drilling Conference, Amsterdam, 20-22 February 2007. SPE/IADC 105866. http://dx.doi.org/10.2118/105866-MS
Jellison M.J., Hassmann S. P., Snapp D. 2000. New Developments in Drill Stem Rotary Shoulder Connections. IADC/SPE Asia Pacific Drilling Technology, Kuala Lumpur, 11-13 September 2000. SPE/IADC 62765. http://dx.doi.org/10.2118/62765-MS
Thomas M., Smith J.E. 1996. Box OD Stability of Double Shoulder Tool Joints at Catastrophic Failure. SPE/IADC Drilling Conference, New Orleans, 12-15 March 1996. SPE/IADC 35035. http://dx.doi.org/10.2118/35035-MS