Flexible Cement Slurry Survives Multistage Hydraulic Fracturing Treatment
- M. D. Hudson (Schlumberger) | P. Sheperd (Schlumberger) | J. Ricci (Schlumberger)
- Document ID
- Society of Petroleum Engineers
- SPE Unconventional Resources Conference, 15-16 February, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2017. Society of Petroleum Engineers
- 2 Well completion, 7.2 Risk Management and Decision-Making, 1.2.3 Rock properties, 0.2 Wellbore Design, 2.10 Well Integrity, 7 Management and Information, 3 Production and Well Operations, 4.1 Processing Systems and Design, 7.2.1 Risk, Uncertainty and Risk Assessment, 1.14.4 Cement and Bond Evaluation, 2.4 Hydraulic Fracturing, 1.14 Casing and Cementing, 4.1.2 Separation and Treating, 4 Facilities Design, Construction and Operation, 2.2 Installation and Completion Operations, 3 Production and Well Operations, 1.14.3 Cement Formulation (Chemistry, Properties)
- Well Integrity, Cementing, Stress Cycling, Hydraulic Fracturing, Flexible Cement
- 4 in the last 30 days
- 247 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Multistage hydraulic fracturingturing treatments in unconventional wells have greatly increased the number and magnitude of stress cycles that must be withstood by primary cement jobs. The stress cycling of hydraulic fracturingturing on Portland Cement, with its intrinsic mechanical properties, may present a risk to long-term well integrity. By modifying the mechanical properties of the set-cement to make it more flexible, the risk of compromising well integrity during hydraulic fracturingturing treatments can be reduced.
The mechanical properties of set-cement designs can be tested in a laboratory setting. This allows quantification of the compressive strength, tensile strength, Young's modulus, and Poisson's ratio of the set cement. Hydraulic fracturingturing design software can be used to quantify the pressure and temperature cycles to which the inner diameter of the primary casing string will be subjected. A mathematical model is used to predict the potential risk of mechanical failure of the set cement based on the mechanical properties and the pressure and temperature cycles of the expected treatment. The mathematical model identifies risk of failure in tension, compression, and de-bonding.
By adding flexible materials to Portland Cement in a reduced water, tri-modal particle-size-distribution blend, the Young's modulus can be reduced while relatively high compressive and tensile strength is maintained. According to the mathematical model, a cement sheath with these properties is at a low risk of mechanical failure in any of the three failure modes up to a certain hydraulic fracturingturing pressure. Wireline logging tools use ultrasonic waves to measure acoustic impedance and flexural attenuation for cement evaluation. These readings are used to assess the integrity of the cement sheath in a 360° solid/liquid/gas map around the casing. These logging data can be used to determine the presence and extent of damage to the cement sheath during the hydraulic fracturingturing operation.
A hydraulic fracturingturing treatment was applied to a well cemented with optimized flexible and trimodal properties. Cement evaluation logs were run before and after treatment for comparison. The post-fracturingturing log showed no damage to the annular cement sheath.
|File Size||1 MB||Number of Pages||6|