Coupling Analytical and Numerical Methods to Assess Performance and Stimulation Efficiency in Multi-Stage Fractured Horizontals
- Shaoyong Yu (Rose & Associates, LLP) | Claude Rezk (ConocoPhillips Canada)
- Document ID
- Society of Petroleum Engineers
- SPE Unconventional Resources Conference, 15-16 February, Calgary, Alberta, Canada
- Publication Date
- Document Type
- Conference Paper
- 2017. Society of Petroleum Engineers
- 5 Reservoir Desciption & Dynamics, 5.6.3 Pressure Transient Analysis, 3 Production and Well Operations, 0.2 Wellbore Design, 1.6.6 Directional Drilling, 1.6 Drilling Operations, 1.2.3 Rock properties, 5.3.4 Integration of geomechanics in models, 5.3 Reservoir Fluid Dynamics
- Performance and Stimulation Efficiency, Multi-stage Fractured Horizontals, Coupling Analytical and Numerical Methods
- 2 in the last 30 days
- 211 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 8.50|
|SPE Non-Member Price:||USD 25.00|
Despite the technological advances in stimulation practices of Multi-fractured-horizontal well (MFHW), many operators (in early-life) still wrestle with the question – "Is it the rock properties or is the stimulation that is impacting my performance?" Addressing this question requires forensic considerations.
From the perspective of rate transient analytics (RTA), the bulk linear flow parameter (LFP) has received much attention in literature as a means of characterizing the performance in MFHW; specifically, in tight rock systems. The most common means of assessing the LFP is via the straight-line approach reconciliation of the rate-normalized (pseudo-) pressure versus square root-time, and time may not necessarily be actual time. Having said that, this a critical step prior to jumping to the square root time plot is to confirm the linear flow regime exists. Best practice is to employ the log-log (specialized plot of the) rate normalized pressure and derivative functions, and confirm that a half-slope is discernible. This approach coupled with the square root time plot bodes the confidence needed for interpretation.
While the bulk Linear Flow Parameter, or the A√K value is a proxy for flow capacity, the constraint is that it cannot uniquely distinguish the quantitative measure of the induced fracture properties from the intrinsic permeability of the rock. Furthermore, it is only an approximate solution with fundamental assumptions and/or required corrections if non-constant diffusivity applies, as well as high-drawdown, multiphase phenomena, exotic diffusion mechanisms and/or compaction effects.
This paper explores the interplay of the individual linear flow parameters by testing various reservoir and stimulation properties via numerical models (i.e. synthetic cases with control variables). The permutations of these tests are reflected via the flow regime signatures observed with the respective LFP and the associated production impacts.
Actual field cases studies are also provided and evaluated analytically to establish consistency and validate the aforementioned observations. The case studies are specific scenarios where production impairment is suspected and could potentially be attributed to stimulation efficiency issues. In other words, field cases are presented where a flow restriction could exist in the respective laterals and the coupled numerical and analytical methods confirm whether milling interventions would or would not necessarily improve production performance.
|File Size||1 MB||Number of Pages||12|
Clarkson, C.R. and Pedersen, P.K.. 2010. Tight Oil Production Analysis: Adaption of Existing Rate-Transient Analysis Techniques. Paper SPE 137352 presented at the Canadian Unconventional Resources and International Petroleum Conference, Calgary, AB, 19-21 Oct. DOI: 10.2118/137352-MS.
Qanbari, F. and Clarkson, C.R. 2013a. Analysis of Transient Linear Flow in Tight Oil and Gas Reservoirs with Stress Sensitive Permeability and Multi-Phase Flow. Paper SPE 167176. Presented in SPE Unconventional Resources Conference Canada, 5-7 November, Calgary. http://dx.doi.org/10.2118/167176-MS.
Clarkson, C.R., Qanbari, F., and Williams-Kovacs, J.D. 2014. Innovative Use of Rate-transient Analysis Methods to Obtain Hydraulic-fracture Properties for Low-permeability Reservoirs Exhibiting Multiphase Flow. The Leading Edge 33 (10): 1108-1122. http://dx.doi.org/10.1190/tle33101108.1.