New Age Fracture Mapping Diagnostic Tools-A STACK Case Study
- K. Haustveit (Devon Energy) | K. Dahlgren (Devon Energy) | H. Greenwood (Devon Energy) | T. Peryam (Devon Energy) | B. Kennedy (Devon Energy) | M. Dawson (Statoil)
- Document ID
- Society of Petroleum Engineers
- SPE Hydraulic Fracturing Technology Conference and Exhibition, 24–26 January, The Woodlands, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2017. Society of Petroleum Engineers
- 5.6.5 Tracers, 3 Production and Well Operations, 3 Production and Well Operations, 1.10 Drilling Equipment, 2.1 Completion Selection and Design, 2.4 Hydraulic Fracturing, 2 Well completion, 2.1 Completion Selection and Design, 5.6 Formation Evaluation & Management, 2.2 Installation and Completion Operations, 2.1.3 Completion Equipment, 5.6.3 Pressure Transient Analysis, 2.2.2 Perforating, 1.10 Drilling Equipment, 5 Reservoir Desciption & Dynamics, 2.5.2 Fracturing Materials (Fluids, Proppant)
- STACK, Frac model, Case study, Spacing pilot, Microseismic
- 12 in the last 30 days
- 1,456 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 8.50|
|SPE Non-Member Price:||USD 25.00|
The application of learnings from an underground laboratory has led to significant completion changes in a world-class North American unconventional asset. Understanding the stimulated fracture geometry in unconventional reservoirs allows for optimal development of the asset. In this paper, we will review a case study comparing both new and commonly accepted technologies to quantify stimulated fracture geometry.
The technologies applied to improve the understanding of fracture geometry in this case study include fiber optic monitoring (Distributed Acoustic Sensing and Distributed Temperature Sensing), borehole microseismic, electromagnetic imaging, offset well pressure monitoring with IMAGE Frac technology, water hammer analysis, and fracture modeling. The validation tools used include a production interference test, Rate Transient Analysis (RTA), Oil Soluble Tracers (OST), and Fracture Fluid Identifiers (FFI).
Fiber optic monitoring was used to assess cluster efficiency, fluid and sand distribution per cluster and diverter effectiveness. Hydraulic half-lengths, heights, and fracture azimuth were estimated using a borehole microseismic system consisting of three vertical arrays and two horizontal arrays. Electromagnetic imaging provided insight on hydraulic half-length for 12 stages. Offset pressure monitoring provided hydraulic and propped half-lengths, heights, and fracture azimuth. The fracture model was calibrated using a diagnostic fracture injection test and vertical logs from the section of interest. Results from the technologies suggest an increase in well density is required to maximize the project net present value.
The offset well pressure data coupled with fiber optic monitoring led to optimization of diverter applications. A variety of completion variables were tested, including fluid design, proppant size, perforation designs and diverter types, results have been integrated into an improved completion design.
|File Size||2 MB||Number of Pages||14|
Ugueto, G. A., Ehiwario, M., Grae, A., Molenaar, M., Mccoy, K., Huckabee, P., & Barree, B. (2014, February 4). Application of Integrated Advanced Diagnostics and Modeling To Improve Hydraulic Fracture Stimulation Analysis and Optimization. Society of Petroleum Engineers. Doi: 10.2118/168603-MS
Dawson, M., Kampfer, G., 2016. Breakthrough in Hydraulic Fracture & Proppant Mapping: Achieving Increased Precision with Lower Cost, Paper SPE 2432330 presented at the 2016 Unconventional Resources Technology Conference (URTeC), San Antonio, TX, 1-3 August. DOI 10.15530/urtec-2016-2432330
Wheaton, B., Haustveit, K., Deeg, W., Miskimins, J., Barree, R., 2016. A Case Study of Completion Effectiveness in the Eagle Ford Shale Using DAS/DTS Observations and Hydraulic Fracture Modeling. Paper SPE 179149 presented at the 2015 SPE Hydraulic Fracturing Technical Conference, The Woodlands, TX, 9-11 February.