Well Intervention Using Plasma Technologies
- Tomas Kristofic (GA Drilling) | Ivan Kocis (GA Drilling) | Tomas Balog (GA Drilling) | Matus Gajdos (GA Drilling) | Igor Kocis (GA Drilling) | Mikhail Gelfgat (GA Drilling)
- Document ID
- Society of Petroleum Engineers
- SPE Russian Petroleum Technology Conference and Exhibition, 24-26 October, Moscow, Russia
- Publication Date
- Document Type
- Conference Paper
- 2016. Society of Petroleum Engineers
- 1.10 Drilling Equipment, 1.6 Drilling Operations, 3 Production and Well Operations, 7.3.3 Project Management, 3 Production and Well Operations, 2.7 Completion Fluids, 2.7.1 Completion Fluids, 2 Well completion, 1.6.1 Drill String Components and Drilling Tools (tubulars, jars, subs, stabilisers, reamers, etc), 1.6.12 Plugging and Abandonment, 1.6.6 Directional Drilling
- 3 in the last 30 days
- 174 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
The paper presents progress made in research and development (R&D) of emerging plasma-based technology for well intervention applications. The technology potential for various upstream applications has been presented at some other SPE conferences (March and September 2015 and January 2016). Current development phase, which is intended for well plug and abandonment (P&A) operations, allows planning applications relevant to modern well intervention needs such as slot recovery, re-entry, lateral drilling and several others.
The experimental basis uses a project plan, which is adequate for development tasks and is periodically updated based on the achieved results. This paper presents results of the latest experiments which focused on the evaluation of cement removal ability and quantification of plasma radial reach.
The paper includes several sections. The first section is Introduction, which briefly summarizes the background of the technology as well as introduces the scope of the experiments. The second section Methods and Procedures explains experimental set-ups, defines samples and procedures used for analysis. The third section Results and Observation describes in detail the main results obtained during extensive testing of the radial reach as well as the results obtained during experiments with three different types of water- and oil- based mud samples. Special attention is given to the result of the plasma impact on casing in case of eccentric position of tubing. The last section summarizes obtained results and presents the possible benefits of plasma-based technique on well intervention applications.
Currently, the research team performs development of infrastructure and bottom-hole assembly (BHA) for tubing milling for onshore and offshore field trials. Moreover, high-pressure (HP) testing well for BHA tubing milling operation tests in high pressure of water/brine environment is also under development. The testing environment will serve for the proof of the system and should confirm the ability of testing in field conditions.
|File Size||11 MB||Number of Pages||13|
Gajdos, M., . 2015. Use of Plasma-based Tool for Plug and Abandonment. Presented at the Offshore Europe Conference & Exhibition held in Aberdeen, 8&-11 September 2015. SPE-175431-MS. http://dx.doi.org/10.2118/175431-MS
Gajdos, M., . 2016. Plasma-based Milling Tool for Light Well Intervention. Presented at the SPE/IADC Middle East Drilling Technology Conference and Exhibition held in Abu Dhabi, UAE, 26&-28 January 2016. SPE-178179-MS. http://dx.doi.org/10.2118/178179-MS
Foreman, B., . 2016. ITF Plugging & Abandonment Theme: Removal of Casing and Tubing, Call for Proposals, March 2016. http://www.itfenergy.com/assets/calls-for-proposals/Well-P/Removal-of-Pipe-Call-v2.pdf
Kocis, I., . 2015. Utilization of Electrical Plasma for Hard Rock Drilling and Casing Milling. Presented at the SPE/IADC Drilling Conference and Exhibition, London, 17-19 March 2015. SPE-173016-MS. http://dx.doi.org/10.2118/173016-MS.
Maslin, E., 2016. Plasma Power, In Offshore Engineer, Published June 1, 2016. http://www.oedigital.com/component/k2/item/12622-plasma-power
Pipeline Magazine, 2015. Q&A: Drilling without drill bits?, In Pipeline Magazine, Published August 9, 2015. https://www.pipelineme.com/features/interviews/2015/08/qa-drilling-without-drill-bits/