Flow Modeling and Comparative Analysis for a New Generation of Wireline Formation Tester Modules
- Morten Kristensen (SPE) | Cosan Ayan (SPE) | Yong Chang (SPE) | Ryan Lee (SPE) | Adriaan Gisolf (SPE) | Jonathan Leonard (SPE) | Piere-Yves Corre (Schlumberger) | Hadrien Dumont (Schlumberger)
- Document ID
- Society of Petroleum Engineers
- SPE Latin America and Caribbean Petroleum Engineering Conference, 21-23 May, Maracaibo, Venezuela
- Publication Date
- Document Type
- Conference Paper
- 2014. Society of Petroleum Engineers
- 5.2 Reservoir Fluid Dynamics, 5.6.3 Pressure Transient Testing, 4.2 Pipelines, Flowlines and Risers, 4.1.2 Separation and Treating, 1.11 Drilling Fluids and Materials, 5.3.2 Multiphase Flow, 5.5 Reservoir Simulation, 5.5.11 Formation Testing (e.g., Wireline, LWD), 5.6.5 Tracers, 4.1.5 Processing Equipment, 5.4.2 Gas Injection Methods, 5.5.8 History Matching
- Reservoir Simulation, Formation Testing, Numerical Modeling, Fluid Sampling, Near-wellbore Modeling
- 0 in the last 30 days
- 193 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 9.50|
|SPE Non-Member Price:||USD 28.00|
Wireline formation testing (WFT) is an integral part of reservoir evaluation strategy in both exploration and production settings worldwide. Application examples include fluid gradient determination, downhole sampling, fluid scanning in transition zones, as well as interval pressure transient tests (IPTTs). Until recently, however, formation testing was still challenging and prone to failure when testing in low-mobility, unconsolidated, or heavy-oil-bearing formations, especially with single-probe type tools. A new-generation WFT module with a 3D radial probe expands the operating envelope. By using multiple fluid drains spaced circumferentially around the tool, the new module can sample in tighter formations and sustain higher pressure differentials while providing mechanical support to the borehole wall.
We performed a detailed flow modeling-based analysis of the contamination cleanup behavior during fluid sampling with the new module. Using both miscible (sampling oil in oil-based mud) and immiscible (sampling oil in water-based mud) contamination models we studied the cleanup behavior over a wide range of formation properties and operating conditions. Comparison of the cleanup performance of the new module with the performance of conventional single-probe tools demonstrates that the new module is 10 to 20 times faster than the single-probe tools when sampling in tight formations. Finally, we also compared the new module against the sampling performance of dual packers and a focused probe.
This work is directly relevant to the planning and fundamental understanding of wireline fluid sampling. The key contributions are miscible and immiscible contamination cleanup models that include the effect of tool storage, a comprehensive analysis of contamination cleanup behavior for the new-generation WFT module with comparisons against conventional single-probe, focused probe, and dual-packer tools, and a characterization of fluid sampling conditions versus the preferred type of sampling tool.
|File Size||8 MB||Number of Pages||16|
Al Otaibi, S.H., Bradford, C.M., Zeybek, M., Corre, P-Y., Slapal, M., Ayan, C., and Kristensen, M. 2012. Oil/Water Delineation with a New Formation Tester Module in an Exploration Well. Paper SPE 159641 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8–10 October.
Flores de Dios, T., Aguilar, M.G., Herrera, R.P., Garcia, G., Peyret E., Ramirez, E., Arias, A., Corre, P-Y., Slapal, M., and Ayan, C. 2012. New Wireline Formation Tester Development Makes Sampling and Pressure Testing Possible in Extra-Heavy Oils in Mexico. Paper SPE 159868 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8–10 October.
Weinheber, P., Gisolf, A., Jackson, R.R., and De Santo, I. 2008. Optimizing Hardware Options for Maximum Flexibility and Improved Success in Wireline Formation Testing, Sampling and Downhole Fluid Analysis Operations. Paper SPE 119713 presented at the Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 4–6 August.