Successful Implementation of Engineered Fiber Based Loss Circulation Control Solution to Effectively Cure Losses While Drilling, Cementing and Work Over Operations in Oman
- Bipin Jain (Schlumberger) | Mohammad Arif Khattak (Schlumberger) | Alvaro Martin Mesa (Schlumberger) | Sultan Al Kalbani (Schlumberger) | Arnoud Willem Meyer (Schlumberger) | Salim Aghbari (Petroleum Development Oman) | Anwar Al-Salti (Petroleum Development Oman) | Benjamin Hennette (Petroleum Development Oman) | Mohammed Khaldi (Petroleum Development Oman) | Ali Al-Yaqoubi (Petroleum Development Oman) | Hamed Hamoud Al-Sharji (Petroleum Development Oman)
- Document ID
- Society of Petroleum Engineers
- SPE Annual Technical Conference and Exhibition, 30 September-2 October, New Orleans, Louisiana, USA
- Publication Date
- Document Type
- Conference Paper
- 2013, Society of Petroleum Engineers
- mud loss, losses while drilling, losses while workover, losses in fractured formations, losses while cementing
- 3 in the last 30 days
- 516 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 5.00|
|SPE Non-Member Price:||USD 28.00|
Oman is a hotspot for drilling activity and wells are being drilled in different environments varying from Deep exploration and development for gas and oil and water injection/disposal. One challenge tops all other challenges: Lost Circulation. Due to the fractured/fissured nature of the formation and low existing reservoir pressures, all major operators are suffering from lost circulation challenges. Some of the challenges include: Mud losses while drilling leading to cost overruns and HSE concerns, primary cement job failure due to not getting the cement up to the desired height resulting in subsequent sustained casing pressure and corrosion, not able to perform work over activity on certain wells due to losses. Enormous quantities of water are required to maintain well control, and due to the limitation of water availability all over Oman, this becomes another critical issue. An Engineered fiber-based Loss Circulation pill has proved successful to address these challenges in multiple fields for Petroleum Development Oman.
Drilling shallow wells in Oman through the naturally fractured limestone formation of Natih, usually results in significant losses of up to 55 m3/h (346 bbl/h) even with a low density drilling fluid of 1,033 to 1,070kg/m3 (8.6 to 8.9lbm/gal). Packoffs are often observed due to the swelling shale section, which leads to several attempts with kick-off plugs and sidetracking. Engineered fibers pills enabled total returns to surface when no other loss circulation solution had worked before. This also enabled to bring cement all the way to surface using 1,410kg/m3 (11.8lbm/gal).
In another field, a work over rig was mobilized to perform a well kill operation and pullout. Due to total losses through perforations into the reservoir, the well kill could not be completed. In addition, every time the water level fell gas started to flow in the well. After 17 attempts and 8 loss circulation material pills, a total of 763m3 (4,800bbl) of well-supply water had been pumped. An engineered fiber pill at 1,474kg/m3 (12.3lbm/gal) was designed and bullheaded into the perforations. The pressures while pumping and squeezing rose to 11,031kPa (1,600psi). The well was shut and observed for 3 hours without any pressure increase indicating losses were cured and gas flow stopped.
Engineered fibers have proved their value in all sorts of lost circulation applications in North Oman. These pills have been successfully used to mitigate losses while drilling, while cementing, during mud circulation before cement job when the casing is on bottom and in work over jobs in depleted reservoirs. With the level of success achieved with such treatments, in some fields it has become a standard practice for curing losses.
|File Size||784 KB||Number of Pages||11|