Static filtration of drilling fluids has long been recognized as an important parameter for drilling operations. Since the standard laboratory testing procedures only consider static conditions, the filtration and cake properties under continuous circulation and dynamic borehole conditions are not usually well determined. Therefore, the measurement of dynamic filtration is particularly important in order to mimic actual downhole conditions.
An experimental study has been carried out by the ITU/PNGE research group to characterize the dynamic filtration properties of clay based drilling fluids. This study is an impressive attempt to figure out the dynamic filtration phenomena of clay based muds. The experimental results obtained from a dynamic filtration apparatus (Fann Model 90) are reported in this study.
Bentonite and sepiolite clays based muds formulated with commercial additives have been investigated throughout the study. Numerous dynamic filtration histories with test duration of 45 to 60 minutes at temperature conditions ranging from 150 to 400 oF, and a differential pressure of 100 psi have been applied to muds. Three key parameters namely spurt loss volume, dynamic filtration rate (DFR), and cake deposition index (CDI) have been determined to characterize the dynamic filtration properties of mud samples.
Results have revealed that bentonite based muds have better dynamic filtration properties than those of sepiolite muds at temperatures up to 250 oF. However, they have lost their stability over 250 oF. Furthermore, formulated sepiolite based muds have remarkable dynamic filtration rates and cake depositions above 300 oF. To sum up, the experimental results of this study point out that sepiolite based muds might be a good alternative to drill wells experiencing high temperatures, particularly in deep oil, gas and geothermal wells.
Number of Pages
Looking for more?
Some of the OnePetro partner societies have developed subject- specific wikis that may help.