Developing High Resolution Static and Dynamic Models for Waterflood History Matching and EOR Evaluation of Giant Middle Eastern Carbonate Reservoir
- Shehadeh K. Masalmeh (Shell Technology Oman) | Lingli Wei (Shell International Exploration & Production B.V.) | Heiko Hillgartner (Petroleum Development Oman) | Rifaat Al-Mjeni (Shell) | Carl P.A. Blom (Shell Intl E&P)
- Document ID
- Society of Petroleum Engineers
- Abu Dhabi International Petroleum Conference and Exhibition, 11-14 November , Abu Dhabi, UAE
- Publication Date
- Document Type
- Conference Paper
- 2012. Society of Petroleum Engineers
- 2.2.2 Perforating, 6.5.2 Water use, produced water discharge and disposal, 5.1.5 Geologic Modeling, 5.1.7 Seismic Processing and Interpretation, 4.1.2 Separation and Treating, 5.5.3 Scaling Methods, 5.1.8 Seismic Modelling, 5.8.7 Carbonate Reservoir, 5.4.1 Waterflooding, 1.2.3 Rock properties, 4.6 Natural Gas, 5.6.4 Drillstem/Well Testing, 5.6.3 Deterministic Methods, 1.7.5 Well Control, 5.7.2 Recovery Factors, 5.5.11 Formation Testing (e.g., Wireline, LWD), 5.3.4 Reduction of Residual Oil Saturation, 5.1 Reservoir Characterisation, 1.6.9 Coring, Fishing, 5.5.2 Core Analysis, 5.1.1 Exploration, Development, Structural Geology, 4.3.4 Scale, 5.5 Reservoir Simulation, 1.6 Drilling Operations, 5.5.8 History Matching, 4.1.5 Processing Equipment, 5.2.1 Phase Behavior and PVT Measurements, 5.6.2 Core Analysis, 5.4.2 Gas Injection Methods
- 4 in the last 30 days
- 411 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 8.50|
|SPE Non-Member Price:||USD 25.00|
Enhanced oil recovery (EOR) has become increasingly important to maintain and extend the production plateaus of existing oil reservoirs. Simulation models for EOR studies require the right level of spatial resolution to capture reservoir heterogeneity. Data acquired from the dedicated observation wells are essential in defining the required resolution to capture reservoir heterogeneity. For giant reservoirs with long production history, their full field models usually have grid block sizes that are of similar scale as the distance between injectors and observation wells, with the consequence of losing the value of the time lapse saturation logs from dedicated observation wells. Therefore, using high resolution sector models, especially from the part of the reservoir where static and dynamic data sets are rich, is a must.
The objective of this paper is to present an improved and integrated reservoir characterization, modelling and water and gas injection history matching procedure of a giant Cretaceous carbonate reservoir in the Middle East. The applied workflow integrates geological, petrophysical, and dynamic data in order to understand the production history and the remaining oil saturation distribution in the reservoir. Large amounts of field data, including time lapse saturation logs from observation wells, have been collected over the last decades to provide insight into the sweep efficiency and flow paths of the injected water.
Iterative simulations were performed to investigate different scenarios and various sensitivities with each iteration involving an update of the static model to honor both the dynamic and core/log data. While applying this iterative process it was also acknowledged that conventional core data (e.g. 1 plug per foot) may not capture the high permeability streaks in these heterogeneous reservoirs that control much of the reservoir flow behaviour, hence much denser plugging and core examination is required. In addition, permeability upscaling procedures need to take into account the fact that core plugs may not represent the effective permeability of the larger connected vuggy pore systems.
The improved understanding of reservoir heterogeneity, the more robust reservoir characterization, and the improved history matching demonstrates that a better representation of reservoir dynamics is achieved. This provides a solid platform for designing and planning future EOR schemes.
Carbonate reservoirs contain more than 50% of world's remaining conventional hydrocarbon reserves and on average have relatively low recovery factors. With the insight that the era of "easy oil?? (conventional oil and natural gas that are relatively easy to extract) is phasing out, enhanced oil recovery (EOR) becomes increasingly important to maintain and extend the production plateaus from existing oil reservoirs. EOR technologies, however, require a refined understanding of reservoir heterogeneities and dynamic field performance. Simulation models for EOR studies need to have the right level of resolution and details. Often, we find that for a giant reservoir with a long waterflood history, working with full field models with coarse simulation grids is not adequate to understand the reservoir performance and calibrate the static model. Therefore, using high resolution sector models, especially from the part of the reservoir where static and dynamic data sets are rich, is a must.
|File Size||6 MB||Number of Pages||19|