Prediction and Monitoring of Installation of Offshore Foundation Monopiles for Windfarms
- Rob Van Dorp (Allnamics Geotechnical Experts BV) | Nicolas Moscoso (Allnamics Geotechnical Experts BV) | Marcel Bielefeld (Allnamics Geotechnical Experts BV) | Gerald Verbeek (Allnamics USA)
- Document ID
- Offshore Technology Conference
- Offshore Technology Conference, 6-9 May, Houston, Texas
- Publication Date
- Document Type
- Conference Paper
- 2019. Offshore Technology Conference
- 4 Facilities Design, Construction and Operation, 4.1 Processing Systems and Design, 4.1.6 Compressors, Engines and Turbines
- pile driving monitoring & testing, pile driving simulation, open pipe piles, pile foundation, Vibrodriving
- 1 in the last 30 days
- 188 since 2007
- Show more detail
- View rights & permissions
Upon recently, most offshore foundations were based on a number of driven piles that were installed with an impact hammer. With the increase in offshore windfarms two major developments have occurred: the shift from jackets to monopiles, leading to increase of the diameter of the foundation piles, and a shift from impact hammers to vibro hammers.
As the use of vibratory hammers is becoming more and more common practice, the need for accurate vibro-driving simulation software has increased, which requires that the soil modelling is enhanced to address soil fatigue during pile driving and to predict reliably the soil behavior and resistance during pile driving. In addition pile driving monitoring, which is routine for piles driven with an impact hammer, needs to become common practice.
This paper addresses advances in soil modelling that allows more accurate pile driving simulation as well as the application of Vibro Driving Analysis (VDA) or Monitoring (VDM) to validate the simulation results. This is illustrated by a case study of the test pile for the Delft Offshore Turbine project, a 28 m long monopile with a diameter of 4 m that was driven 15 m into dense sand layers using a vibro hammer. After some 6 months the pile was extracted, and pile driving simulations and VDA were done both for the installation and extraction phase.
|File Size||1 MB||Number of Pages||16|
LeBlanc Thilsted, C., "Vibro-Driving Monopiles—A Feasible Installation Concept for the Future?" presented at the Danish Geotechnical Society Seminar, Gentofte, Denmark, April 1, 2014, https://danskgeotekniskforening.dk/sites/default/files/pdf/pdf2014/Moede%202/Session%204%20-%20Presentation%203%20-%20C%20LeBlanc%20-%20DONG%20Energy%20-%20Vibro-driving%20of%20monopiles%20-%20DGF%20Seminar%202014-04-01.pdf