Trend Braking Completion/intervention Methods
- Sigurd Myge Erlandsen (StatoilHydro)
- Document ID
- Offshore Technology Conference
- Offshore Technology Conference, 5-8 May, Houston, Texas, USA
- Publication Date
- Document Type
- Conference Paper
- 2008. Offshore Technology Conference
- 2.3 Well Monitoring Systems, 2.3.3 Inflow Control Equipment, 5.2.1 Phase Behavior and PVT Measurements, 3.2.2 Downhole intervention and remediation (including wireline and coiled tubing), 3.3 Well & Reservoir Surveillance and Monitoring
- 1 in the last 30 days
- 284 since 2007
- Show more detail
- View rights & permissions
An important focus area in StatoilHydro's IOR strategy is ‘efficient drainage of reservoirs'. As the oil industry struggles to improve ultimate recovery and to make marginal projects economical, wells must provide cost-effective means to gather reservoir information and produce them efficiently. This paper describes the challenges associated with uneven inflow into the well bore causing increasing water cut and/or gas-oil-ratio with corresponding decling oil rate.
As well construction becomes more and more advanced it is increasingly important to ensure optimal inflow along the entire reservoir section of the well, whether it is a long horizontal section or a multi lateral well. For some applications mechanical sliding sleeves can be an effective way of shutting off poor performing zones. Fixed inflow control devices (ICDs) has also proven to be a valuable way of equalizing inflow for maximizing oil production from thin oil rims. Remotely operated ICV's enables choking or shutting-off zones from surface if they experience high GOR or water cut. Different applications have different fit for purpose solutions.
Autonomous valves represents the next step for inflow control as it enables choking of zones with excessive water cut or GOR without any use of control cables. In order to fully utilize advanced well construction, it is also cruisial to ensure adequate reservoir monitoring. The paper also describes this by means of fibre optics.
In most oil fields with declining oil production it is caused by uneven inflow along the wellbore giving early gas and/or water break through. Inflow control by mechanical sliding sleeves, fixed inflow control devices (ICDs) and remotely operated ICVs (smart completions) have given valuable increased production due to limitation of unwanted production of excessive gas or water. Future challenge will be to find cost effective completions for the advanced well architecture that is robust enough.
Mechanical sliding sleeves
Mechanical sliding sleeves have been used for decades for selective zonal shut-off of unwanted water production or excessive GOR. It has proven to be a robust solution, but there are some limitations. In addition to the economic aspect of well intervention to shut or open a sleeve, it is limited to open or shut and has does not enable choking.
|File Size||256 KB||Number of Pages||5|