Study of Ultra-Dry CO2 Foam Fracturing Fluid Enhanced By Graphene Oxide
- Qichao Lv (China University of Petroleum) | Zhaomin Li (China University of Petroleum) | Rong Zheng (China University of Petroleum)
- Document ID
- International Petroleum Technology Conference
- International Petroleum Technology Conference, 26-28 March, Beijing, China
- Publication Date
- Document Type
- Conference Paper
- 2019. International Petroleum Technology Conference
- 2.4 Hydraulic Fracturing, 5.2 Fluid Characterization, 3 Production and Well Operations, 5.8.2 Shale Gas, 2 Well completion, 5 Reservoir Desciption & Dynamics, 1.6.9 Coring, Fishing, 5.8.3 Coal Seam Gas, 1.8 Formation Damage, 4.3.4 Scale, 5.8.1 Tight Gas, 2.5.2 Fracturing Materials (Fluids, Proppant), 5.8 Unconventional and Complex Reservoirs, 1.6 Drilling Operations, 5.8.4 Shale Oil, 5.2.2 Fluid Modeling, Equations of State
- ultra-dry foam, fracturing fluid, graphene oxide, unconventional oil and gas, CO2
- 0 in the last 30 days
- 137 since 2007
- Show more detail
- View rights & permissions
|SPE Member Price:||USD 7.00|
|SPE Non-Member Price:||USD 23.00|
Unconventional oil and gas resources such as shale gas, shale oil, CBM, tight gas and oil have attracted more and more attention worldwide in recent years. However, most of the formations of unconventional oil and gas are suffering from poor geological condition, thus the resources can not be developed without fracturing stimulation. Conventional hydraulic fracturing usually consumes a huge amount of water and also leads to the pollutions of surface water and even residential water. In addition, the formation damage caused by incomplete gel breaking, adsorption of polymers, clay expansion and water blocking are still not fully eliminated.
Thus, in this work, ultra-dry CO2 foam stabilized by graphene oxide (GO) were explored to get a fracturing fluid characterized by low water consumption, environmental friendliness, high efficiency and low formation damage. The foam quality of fracturing fluid in the study was higher than 90%, thus the water consumption of fracturing fluid was lower than 10% of total volume. The foam stability, rheology and dynamic filtration were studied by using a large-scale fracturing fluid test device.
The results showed that the stability and thermal adaptability of ultra-dry CO2 foam were enhanced by the addition of graphene oxide. The interfacial dilatational viscoelastic modulus of CO2/liquid was increased when the graphene oxide was used with saponin, implying that the bubble film interface became solid-like; The ultra-dry CO2 foam enhanced by the graphene oxide showed a shear thinning behavior. The effective viscosity of ultra-dry CO2 foam was increased by adding graphene oxide and its viscosity was higher than 50 mPa·s at a shear rate of 100s-1; Moreover, compared to pure surfactant foam, the filtration control performance of ultra-dry CO2 foam was also enhanced by graphene oxide. At a filtration pressure difference of 3.5MPa, the filtration coefficient of ultra-dry CO2 foam was decreased significantly by the addition of graphene oxide. Although the core damage caused by foam with graphene oxide was slightly higher than that of pure surfactant foam, the permeability damage was still below 10%, implying that the foam as a fracturing fluid is relatively clean to formation.
Ultra-dry CO2 foam fracturing fluid stabilized by graphene oxide provides a new high-performance fracturing system for unconventional oil and gas at water-deficient area. This study will be beneficial to fracturing applications characterized by low water consumption, environmental friendliness, high efficiency and low formation damage.
|File Size||889 KB||Number of Pages||8|
Dong, Z.,Holditch, S.,McVay, D.,et al. 2012. Global Unconventional Gas Resource Assessment. SPE Economics & Management 4(04): 222-234. SPE-148365-PA. https://doi.org/10.2118/148365-PA.
Gall, B. L.,Sattler, A. R.,Maloney, D. R.,et al. 1988. Permeability Damage to Natural Fractures Caused by Fracturing Fluid Polymers. Presented at SPE Rocky Mountain Regional Meeting, Casper, 11-13 May. SPE-17542-MS. https://doi.org/10.2118/17542-MS.
Grundmann, S. R.,Lord, D. L. 1983. Foam Stimulation. Journal of Petroleum Technology 35(03): 597-602. SPE-9754-PA. https://doi.org/10.2118/9754-PA.
Harris, P. C. 1985. Dynamic Fluid Loss Characteristics of Foam Fracturing Fluids. Journal of Petroleum Technology 37(10): 1847-1852. SPE-11065-PA. https://doi.org/10.2118/11065-PA
Harris, P. C. 1992. Application of Foam Fluids to Minimize Damage During Fracturing. Presented at International Meeting on Petroleum Engineering, Beijing, 24-27 March. SPE-22394-MS. https://doi.org/10.2118/22394-MS.
Ribeiro, L. H.,Sharma, M. M. 2012. Multiphase Fluid-Loss Properties and Return Permeability of Energized Fracturing Fluids. SPE Production & Operations 27(03): 265-277. SPE-139622-PA. https://doi.org/10.2118/139622-PA.
Watkins, E. K.,Wendorff, C. L.,Ainley, B. R. 1983. A New Crosslinked Foamed Fracturing Fluid. Presented at SPE Annual Technical Conference and Exhibition, San Francisco, 5-8 October. SPE-12027-MS. https://doi.org/10.2118/12027-MS.